Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Support is switched off
Incidents and every piece of open work, with who has it. This demo has the Support module switched off in Organisation settings.
IncidentINC0041158ResolvedMajor incident · commander On call: Liam Doyle until Monday 08:00SimulatedServiceNow · INC0041158 · 14:25
Curlew screen is blank
Resolved at 14:25 · Cancelled · took 15 minchecked just now
- 15 minTook
- 0Hand-offs
- 2Findings
- New7 Oct, 14:10 · Oliver Grant15 min
- Resolved7 Oct, 14:25 · Oliver GrantCancelled
Response target 16 working hours
2.03 Curlew
Hybrid meeting room · Display litSpace pageDrawn to scale · 6.60 × 5.20 m, 34.3 m² · 8 seats · Outlets: Type G sockets; UK and Ireland plates, 86 and 146 mm wide; floor boxes with a 300 mm lid · C-shaped table 4.8 × 1.6 m, nearest edge 1.45 m from the display wall
Timeline
Every event: who, what, when and where it came from- 7 Oct
Oliver Grant Resolved, cancelled: Raised for the wrong room. The caller was in 2.02 Heron, where the screen was on standby and woke when he touched the panel. Nothing wrong in Curlew.
ServiceNow · INC0041158
rule: Match tickets to spaces (Priya) Matched to Curlew display 1. Monitoring: both displays are on and showing the video bar's home screen. ·
Oliver Grant Came in: The screen in Curlew is blank. No meeting yet, just checking before 15:00.
ServiceNow · INC0041158
Keia Atlas Proposed P4, from impact and urgency
- 28 May
- 17 Feb 2025
Asset register Curlew display 1 installed
DEMO-LON-001312 · AG-001312
Nothing of this kind on the record yet.
Wiring, with the display's path lit
15 signal cables, 14 to outletsEverything its signal passes through is lit.
List every cable
| Cable | From | To |
|---|---|---|
| HDMI | Video bar, hdmi-out-1 | Display 1, hdmi-in-1 |
| HDMI | Video bar, hdmi-out-2 | Display 2, hdmi-in-1 |
| Cat 6A | HDBaseT transmitters, one per side table 1, hdbaset-1 | HDBaseT receivers 1, hdbaset-1Direct cable run 1 |
| Cat 6A | HDBaseT transmitters, one per side table 2, hdbaset-1 | HDBaseT receivers 2, hdbaset-1Direct cable run 2 |
| USB-C | HDBaseT transmitters, one per side table 1, usb-c-1 | LaptopLeft side table |
| USB-C | HDBaseT transmitters, one per side table 2, usb-c-1 | LaptopRight side table |
| HDMI | HDBaseT receivers 1, hdmi-out-1 | Chooses between the laptop inputs, hdmi-in-2 |
| HDMI | HDBaseT receivers 2, hdmi-out-1 | Chooses between the laptop inputs, hdmi-in-3 |
| USB | HDBaseT receivers 1, usb-b-1 | Chooses between the laptop inputs, usb-b-2 |
| USB | HDBaseT receivers 2, usb-b-1 | Chooses between the laptop inputs, usb-b-3 |
| HDMI | Chooses between the laptop inputs, hdmi-out-1 | Video bar, hdmi-in-1 |
| USB | Chooses between the laptop inputs, usb-a-2 | Video bar, usb-c-1Device mode |
| Cat 6 | Chooses between the laptop inputs, lan-1 | In-room network switch, lan-2The switch powers the switcher (PoE) |
| Cat 6 | Video bar, lan-2 | In-room network switch, lan-1Link-local network for Poly IP accessories |
| Cat 6 | In-room network switch, lan-9 | Data outlet 2, behind the displayUplink |
| Cat 6 | Video bar, lan-1 | Data outlet 5, behind the display |
| Cat 6 | Display 1, lan-1 | Data outlet 1, behind the display |
| Cat 6 | Display 2, lan-1 | Data outlet 4, behind the display |
| Poly microphone | Microphone 1, mic-1 | Video bar, mic-1The second microphone chains from the first (house assumption) |
| Cat 6 | Touch controller, lan-1 | Data outlet 1, below the table |
| Power | Display 1, power-in | Power outlet 1, behind the display |
| Power | Video bar, power-in | Power outlet 2, behind the display |
| Power | HDBaseT receivers 1, power-in | Power outlet 3, behind the display |
| Power | Chooses between the laptop inputs, power-in | Power outlet 4, behind the display |
| Power | Display 2, power-in | Power outlet 5, behind the display |
| Power | HDBaseT receivers 2, power-in | Power outlet 6, behind the display |
| Power | In-room network switch, power-in | Power outlet 7, behind the display |
| Power | HDBaseT transmitters, one per side table 1, power-in | Power outlet 1, below the table |
| Power | HDBaseT transmitters, one per side table 2, power-in | Power outlet 2, below the table |
In ServiceNow
- Number
- INC0041158
- Opened
- 7 Oct 2026, 14:10
- Caller
- Oliver Grant
- Priority
- 4, low
- Proposed priority
- 4, low, not changed
- State
- Resolved
- Assignment group
- AV and IT, EMEA
- Assigned to
- Tom Ashby
- Short description
- Curlew screen is blank
- Resolution code
- Cancelled
- Resolution notes
- Raised for the wrong room. The caller was in 2.02 Heron, where the screen was on standby and woke when he touched the panel. Nothing wrong in Curlew.
Added by Keia Atlas
- About
- Curlew display 1, AG-001312
- Where
- 2.03 Curlew, London office, London
- Service
- AV · owner Sofia Reyes
- Response target
- 16 working hours, in working hours
- Matched by
- The ticket names Curlew at the London office.
- Symptom in the guide
- No picture
- First check
- Keia Atlas record. Likely: display off or on the wrong input, HDBaseT link down, source device asleep