Heron displayModel set per project · lon-202-dsp01 · Display wall
Viewing as , ,
Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Projects is switched off
Projects, the schedule, planning, the work plan and the Lab. This demo has the Projects module switched off in Organisation settings.
Task T-0907Install · Deploy phasePRJ-09 London office meeting room refreshDoneSimulated
Swap the video bar in Heron
Done · 5 steps completechecked just now
- 27 MayWas due 27 May
- 5 hEstimate
- 5/5Steps done
What to do
From the AV refresh playbook, Deploy phase: "When a vendor does the swap: record serial and MAC for each position, with a label photo".
The phase is done when: Every space in the batch installed; Every space passes, or its snags are accepted.
The space
- 2.02 HeronSmall meeting room
Assign to
How it closed
Nothing new: the guide was rightClosing needs a fix or a reason. The reasons show how good the guides are.
The devices
5 in this roomHeron video barPoly Studio X52 · lon-202-vc01 · Display wall
Heron touch controllerPoly TC10 · lon-202-tc01 · On the desk
Heron hDBaseT transmitterKramer EXT3-C-XR-T · Below the table
Heron hDBaseT receiver at the displayKramer EXT3-POE-XR-R · Behind the display