Vendor access

This part is for Aigna staff

Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.

Go to your installation

Module

Projects is switched off

Projects, the schedule, planning, the work plan and the Lab. This demo has the Projects module switched off in Organisation settings.

Organisation settings

Work reportDoneSimulated

Work report: Power and data at the display walls

Complete · no differences from the planchecked just now

Back to the task

Keia Atlas · Work report

Power and data at the display walls

DoneGenerated 19 Oct 2026

Task: T-1403 Power and data at the display walls
Project: PRJ-14 Juneau office fit-out
Office: Juneau office
Kind of work: Deploy phase, facilities work
Space: Whole project
Done by: Ruth Kelly, Project manager
Due: 21 Aug 2026
Estimate: 6 h
Closed with the phase: Phase still open

What was done

Power and data at the display walls. Nothing new: not device related.

Steps followed

Confirm power and data outlets with facilities against the space type's outlet list.
Power in AV spaces must be always on: no light switch can turn it off.
The table floor box sits under a table leg, so nobody trips on it.

Who

Ruth KellyProject manager6 h estimatedRuns the programme of works, the vendor and the handover

Devices installed or changed

No devices were installed or changed by this work.

Evidence

Closing note: Nothing new: not device related
Recorded for the Deploy phase: Vendor install records
Recorded for the Deploy phase: As-built cable schedule
Recorded for the Deploy phase: Photos per position

Deviations and added tasks

No deviations recorded.

Sign-off

Task closed

Done byRuth KellySignatureDate

Project managerRuth KellySignatureDate