Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Projects is switched off
Projects, the schedule, planning, the work plan and the Lab. This demo has the Projects module switched off in Organisation settings.
Batch 2 of 9 · Project PRJ-18Simulated live
2 Poly TC10 touch controllers
0 of 2 units set up · nothing to reviewchecked just now
Setup is done by Aigna's engineers. Your installs are on the Deploy page.
Once for all 2
Through Fleet Lens, the Tokyo office policyNot applied yet. One setup guide sets the shared settings on all 2; 0 can take it now, the rest when they can be reached.
3 settings to set and 0 to check; 0 left at the manufacturer's default.See every settingThe setup guide
The same on every unit
- Network
- PoE port on the room system's subnet
- Admin password
- Synced from the room system
The units
Only what differs per unit. Each unit's build sheet has every setting worked out.Nothing is ready for you here. Keia Atlas keeps checking these units.
| Unit | Hostname | Pairs with | Provision | Install | Configure | |
|---|---|---|---|---|---|---|
| Build sheet | tyo-1503-tc0110.80.15.204 | tyo-1503-vc01 | ||||
| Build sheet | tyo-1504-tc0110.80.15.35 | tyo-1504-vc01 | ||||
Setup order
Optional: tick as you go, or let the checks do it1Connect the TC10 to a PoE port on the same subnet as the room system.0/2
2In the system's web interface, open General Settings > Device Management > Available Devices.0/2
3Find the TC10 by its MAC address and select Pair.0/2
4Check it shows the space's calendar.0/2
Every setting
3 in the setup guide, as patternsValues marked Per unit are patterns here. Each unit's build sheet has them worked out: tyo-1503-tc01, tyo-1504-tc01.
Pairing3
- PairPer unitGeneral Settings > Device Management > Available DevicesSet to The TC10 with this space's MAC addressWorked out on each build sheet
Why
Pairing by MAC stops a controller pairing with the space next door.
- NetworkSet to PoE port on the room system's subnet
Why
Pairing only works on the same subnet.
- Admin passwordSet to Synced from the room system
Why
Since 4.6.2 the system pushes its admin password to paired devices.