Keia Atlas
Healthy- Space3.01 Reception
- ModelPer project
- SerialDEMO-DUB-003501
- LifecycleIn service
Healthy when recorded in the space its space type expects; every port wired as the space type says.
Viewing as , ,
Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Assets is switched off
Device types, units, models, setup guides, standards, IT stores and cables. This demo has the Assets module switched off in Organisation settings.
Device typesecurity-deviceVersion 1.0Model set per project
Security device
4 units in service · no advisories to review
No specific model: each project picks one.
Outline for its kind
Checked on one example, dub-301-cam01 (simulated values).
Asset register
Healthy- Asset tagAG-003501
- SerialDEMO-DUB-003501
- ModelPer project
- Space3.01 Reception
- StatusActive
- Hostnamedub-301-cam01
Healthy when status is active; space matches where the device is installed.
Addresses and DNS
Healthy- Hostnamedub-301-cam01
- MAC02:A2:F0:E0:BA:0A
- IP address10.20.3.62
Healthy when address reservation matches the MAC address; forward and reverse DNS records resolve.
Monitoring
Healthy- Monitor namedub-301-cam01
Healthy when reporting; no open critical alerts.
What each field means, and how hostnames and addresses are built: Learn: device fields
Nothing to configure on this kind of device
It works as it comes, or it is set up through the device it connects to. See every setup guide.
No firmware line tracked for this kind of device
When the vendor watcher tracks a model, its releases, Aigna's decision on each, and any advisories appear here and on every device of that model.
Symptoms
Likely causes and where to look firstDevice offlinePoE port off; Network cable unpluggedCheck Monitoring first
Cross-checks
The same fact must agree everywhere it is recorded| Check | Compares |
|---|---|
| Serial match | keia_atlas.serial = inventory.serial |
| Space match | keia_atlas.space = inventory.space |
| Hostname match | inventory.hostname = dhcp_dns.hostname |
Used in
Device type file
- File
- data/device-classes/security-device.yaml
- Version
- 1.0
- Updated
- 2026-09-27
- Hostname prefix