Vendor access

This part is for Aigna staff

Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.

Go to your installation

Module

Projects is switched off

Projects, the schedule, planning, the work plan and the Lab. This demo has the Projects module switched off in Organisation settings.

Organisation settings

Task T-1205Commission · Deploy phasePRJ-12 New York office video bar refreshTo doSimulated

Commission Curlew and run the verification

To do · due in 8 dayschecked just now

27 OctDue in 8 days
3 hEstimate
0/5Steps done

Open in Deploy

On the Deploy board8 devices, each with its Commission checklist to tick, live with the rest of the team.Open in Deploy

What to do

Run the space's verification: every device recorded, on its address, in device management and on standard firmware.
Make a test call from another site, not the space next door.
Check camera framing and microphone levels from the far end.
List any snags; each gets an owner and a date.
Close with what fixed anything unexpected, or "Nothing new" and why.

From the AV refresh playbook, Deploy phase: "Run the verification for each space".

The phase is done when: Every space in the batch installed; Every space passes, or its snags are accepted.

The space

20.05 CurlewLarge meeting room

How it closed

Closing a task needs one of these. It takes under 30 seconds.

The devices

8 in this room

Curlew displayModel set per project · nyc-2005-dsp01 · Display wall

Healthy when

recorded in the space its space type expects
every port wired as the space type says
status is active
space matches where the device is installed
address reservation matches the MAC address

Curlew displayModel set per project · nyc-2005-dsp02 · Display wall

Healthy when

recorded in the space its space type expects
every port wired as the space type says
status is active
space matches where the device is installed
address reservation matches the MAC address

Curlew video barPoly Studio X72 · nyc-2005-vc01 · Display wall

Firmware 4.6.2.46004626 Set · 14 Verify

Healthy when

recorded in the space its space type expects
every port wired as the space type says
status is active
space matches where the device is installed
address reservation matches the MAC address

Curlew touch controllerPoly TC10 · nyc-2005-tc01 · On the desk

3 Set · 0 Verify

Healthy when

recorded in the space its space type expects
every port wired as the space type says
status is active
space matches where the device is installed
address reservation matches the MAC address

Curlew hDBaseT transmitterKramer EXT3-C-XR-T · Below the table

2 Set · 8 Verify

Healthy when

recorded in the space its space type expects
every port wired as the space type says
status is active
space matches where the device is installed

Curlew hDBaseT receiver at the displayKramer EXT3-POE-XR-R · Behind the display

2 Set · 8 Verify

Healthy when

recorded in the space its space type expects
every port wired as the space type says
status is active
space matches where the device is installed

Curlew microphonePoly Studio Expansion Microphone · On the desk

1 Set · 1 Verify

Healthy when

recorded in the space its space type expects
every port wired as the space type says
status is active
space matches where the device is installed

Curlew scheduler panelLogitech Tap Scheduler · nyc-2005-sch01 · At the door

5 Set · 0 Verify

Healthy when

recorded in the space its space type expects
every port wired as the space type says
status is active
space matches where the device is installed
address reservation matches the MAC address

This part is for Aigna staff

Projects is switched off

Commission Curlew and run the verification

What to do

The space

How it closed

The devices

View as

Suggested

Delivery

Support and service

The Lab

Leadership

Partners

Overview

Settings

Tell the team