Keia Atlas

Vendor access

This part is for Aigna staff

Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.

Go to your installation

Module

Projects is switched off

Projects, the schedule, planning, the work plan and the Lab. This demo has the Projects module switched off in Organisation settings.

Organisation settings

Batch 5 of 12 · Project PRJ-19Simulated live

1 Kramer TP-580Rxr AV extender

0 of 1 unit set up · nothing to reviewchecked just now

Open the next batch

Setup is done by Aigna's engineers. Your installs are on the Deploy page.

Once for all 1

Through Front-panel DIP switches

Set on each unit by hand Front-panel DIP switches. Keia Atlas cannot read these back, so a person confirms them.

1 settings to set and 1 to check; 0 left at the manufacturer's default.See every settingThe setup guide

The same on every unit

NORMAL/XTRA RANGE Slide Switch
NORMAL (up to 100m at 1080p@60Hz 36bpp)

The units

Only what differs per unit. Each unit's build sheet has every setting worked out.

Nothing is ready for you here. Keia Atlas keeps checking these units.

UnitProvisionInstallConfigure
Build sheet

Setup order

Optional: tick as you go, or let the checks do it
  1. 1Mount TP-580Rxr at the display end (ceiling void or rack).0/1
  2. 2Set the NORMAL/XTRA RANGE slide switch to match the cable run before connecting power.0/1
  3. 3Connect the HDBT IN RJ-45 to the transmitting device's HDBT OUT with a single certified HDBaseT cable.0/1
  4. 4Connect HDMI OUT to the display.0/1
  5. 5Power from its own 12V adapter; no PoE is documented for this model.0/1
  6. 6Confirm the LINK LED lights and the display syncs at full resolution.0/1

Every setting

2 in the setup guide, as patterns

Values marked Per unit are patterns here. Each unit's build sheet has them worked out: 8.01 Reception.

Front panel2
  • NORMAL/XTRA RANGE Slide SwitchRear panel > NORMAL/XTRA RANGE slide switchSet to NORMAL (up to 100m at 1080p@60Hz 36bpp)
    Why

    The manual states no factory default for this switch, so every install must set it deliberately; NORMAL gives full colour depth for Aigna's typical runs, XTRA trades colour depth for 150m reach on a longer run.

  • RS-232 extensionCheck it is Fixed at 115200 baud; not adjustable
    Why

    Confirms the connected controller or display is also set to 115200, since the extender can't be changed to match a different rate.

View as

See Keia Atlas the way someone else does. A demo: nobody signs in.

Viewing asAnna ByrneAV and IT delivery engineer · EMEA

Suggested

Delivery

  • Delivery engineerDesigns and commissions spaces, from survey to handover
  • Project managerRuns projects day to day: dates, suppliers and who does what
  • On-site technicianInstalls and fixes kit in the offices
  • Programme managerPlans the year of projects across every region
  • Engineering managerLeads the delivery engineers
  • Project management leadLeads the project managers
  • On-site services managerLeads the on-site technicians
  • Delivery managerThe whole delivery team, every region

Support and service

  • Service desk analystTakes incidents as they arrive and routes them
  • Network engineerPorts, VLANs and patching
  • Service manager, AVOwns the AV standard and its service
  • Service manager, networkOwns the network standard and its service

The Lab

  • Innovation engineerTests new kit before it ships

Leadership

  • Head of AV and ITThe whole service, every region

Partners

  • Integration vendorSees their own installations only
  • Service vendorRepairs under the service contract

Overview

  • EveryoneEvery role's first screen at once, to see the whole picture

Settings

Appearance
LookStudio
Text size
Default

Report

Tell the team

About PRJ-19 Melbourne office IDF switch refresh, 1 Kramer TP-580Rxr AV extender

Goes to Sofia Reyes, Service manager, AV. Reviewed within five working days.