Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Projects is switched off
Projects, the schedule, planning, the work plan and the Lab. This demo has the Projects module switched off in Organisation settings.
Batch 3 of 4 · Project PRJ-20Simulated live
1 Apple Studio Display monitor
1 unit checked, ready to accept · 0 of 1 set upchecked just now
Setup is done by Aigna's engineers. Your installs are on the Deploy page.
Once for all 1
Through On each unitSet on each unit by hand On each unit. Keia Atlas cannot read these back, so a person confirms them.
0 settings to set and 1 to check; 0 left at the manufacturer's default.See every settingThe setup guide
The units
Only what differs per unit. Each unit's build sheet has every setting worked out.Nothing is ready for you here. Keia Atlas keeps checking these units.
| Unit | Provision | Install | Configure | |
|---|---|---|---|---|
| Build sheet | ||||
Setup order
Optional: tick as you go, or let the checks do it1Connect the display's upstream Thunderbolt 5 port to the desk's Mac.0/1
2On the Mac, open System Settings > General > Software Update and check for a display firmware update.0/1
3Click Update Now if one is offered, then Restart when prompted; don't unplug the display while it updates.0/1
4Run the desk's verification.0/1
Every setting
1 in the setup guide, as patternsValues marked Per unit are patterns here. Each unit's build sheet has them worked out: Guildford home office 2.
Firmware1
- Studio Display firmwareSystem Settings > General > Software UpdateCheck it is Current Apple-published version
Why
The display has no settings of its own; its firmware is pushed from the connected Mac's own Software Update, so Aigna checks it there rather than on the display.