Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Projects is switched off
Projects, the schedule, planning, the work plan and the Lab. This demo has the Projects module switched off in Organisation settings.
Build sheetBatch 9 of 16Project PRJ-22Simulated live
dub-303-amp01
3 values not recorded yet · 8 settings to set, 12 to checkchecked just now
Asset register
Assetbox › Assets- Asset tagAssetbox › Assets
The install recordAG-000286CheckThis unitNot seen yet - Serial numberAssetbox › Assets
The install recordDEMO-DUB-000286CheckThis unitNot seen yet - ModelAssetbox › Assets
The space typeKramer PA-240ZCheckEvery unitNot seen yet - LocationAssetbox › Assets
The spaceDublin office, 3.03 HeronSetThis unitNot seen yet
DHCP and DNS
InfoDNS › Records- DNS name (A and PTR records)InfoDNS › DNS
The hostname and the house domaindub-303-amp01.aigna.exampleSetThis unitNot seen yet - DHCP reservationInfoDNS › DHCP › Reservations
The site's address plan (simulated)10.20.3.59SetThis unitNot seen yet - MAC address for the reservationInfoDNS › DHCP › Reservations
Not recordedNot recorded yet. The installer reads it from the unit's label and records it with the serial.
SetThis unitNot seen yet - DNS servers handed outInfoDNS › DHCP › Scope options
The Europe, Middle East and Africa resolvers10.20.0.53, 10.20.0.54CheckEvery unitNot seen yet - Time servers handed out (option 42)InfoDNS › DHCP › Scope options
The house time serversntp1.aigna.example, ntp2.aigna.exampleCheckEvery unitNot seen yet
Switch port
Network controller › Ports- VLAN (native, untagged)Network controller › Ports
Not recordedThe network standard's VLAN plan does not name amplifiers yet.
SetEvery unitNot seen yet - PortNetwork controller › Ports
The port it is patched to (simulated)dub-303-sw01 port 9CheckThis unitNot seen yet
Network
Device Settings web page- DHCPDevice Settings web page › Device Settings › Ethernet Settings
Leave it on DHCP (On, with a reservation on the AV VLAN). The reservation gives it this address.Its DHCP reservation (simulated address plan)10.20.3.59CheckThis unitConfirm by hand
Firmware
Device Settings web page- Firmware update methodDevice Settings web page
The setup guide, the same on every unitManual upload only, no automatic-update toggle existsCheckEvery unitConfirm by hand
Output mode (DIP-switches)
Rear panel Hi-Z/Lo-Z and 100V/70V DIP-switches- Hi-Z/Lo-Z (DIP 1)Rear panel Hi-Z/Lo-Z and 100V/70V DIP-switches › Rear panel › Hi-Z/Lo-Z and 100V/70V DIP-switches › DIP 1
The setup guide, the same on every unitHi-Z (default)CheckEvery unitConfirm by hand - 70V/100V (DIP 2)Rear panel Hi-Z/Lo-Z and 100V/70V DIP-switches › Rear panel › Hi-Z/Lo-Z and 100V/70V DIP-switches › DIP 2
The setup guide, the same on every unit100V (default)CheckEvery unitConfirm by hand
Security
Security › Authentication page- Activate SecuritySecurity › Authentication page
The setup guide, the same on every unitEnabled (default)CheckEvery unitConfirm by hand - Web pages user name and passwordSecurity › Authentication page
From the password vault,
The password vault. The secret itself is never shown here.Dublin office / AV / Kramer PA-240Z / Web pages user name and passwordSetThis unitConfirm by hand
Audio
Speaker Output web page- High-Pass FilterSpeaker Output web page
The setup guide, the same on every unitOnSetEvery unitConfirm by hand - Bass/Mid/Treble EQSpeaker Output web page
The setup guide, the same on every unitFlat (0dB), Kramer's defaultCheckEvery unitConfirm by hand - Master VolumeSpeaker Output web page
Not recordedDecided or measured on site, during setup or commissioning, so it is not recorded before. Note it on the unit afterwards.
SetThis unitConfirm by hand
No setting matches these filters.