Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Projects is switched off
Projects, the schedule, planning, the work plan and the Lab. This demo has the Projects module switched off in Organisation settings.
Build sheetBatch 14 of 16Project PRJ-22Simulated live
4.03 Heron adapter
Every value recorded · 11 settings to set, 5 to checkchecked just now
Asset register
Assetbox › Assets- Asset tagAssetbox › Assets
The install recordAG-000177CheckThis unitNot seen yet - Serial numberAssetbox › Assets
The install recordDEMO-CPH-000177CheckThis unitNot seen yet - ModelAssetbox › Assets
The space typeKramer VP-440H2CheckEvery unitNot seen yet - LocationAssetbox › Assets
The spaceCopenhagen office, 4.03 HeronSetThis unitNot seen yet
Network
Front panel OSD (Advanced › Ethernet) or Device Settings web page- IP MODEFront panel OSD (Advanced › Ethernet) or Device Settings web page › Advanced › ETHERNET › IP MODE
Leave it on DHCP (DHCP, with a reservation on the AV VLAN). The reservation gives it this address.Its DHCP reservation (simulated address plan)10.90.4.218SetThis unitConfirm by hand - CONTROL PORTFront panel OSD (Advanced › Ethernet) or Device Settings web page › Advanced › ETHERNET › CONTROL PORT
The setup guide, the same on every unitKramer's default IP control portCheckEvery unitConfirm by hand
OSD and audio
Front panel OSD- OSD DISPLAYFront panel OSD › OSD › DISPLAY
The setup guide, the same on every unitINFO (shown for 10 seconds)SetEvery unitConfirm by hand - MIC MODEFront panel OSD › Audio › MIC SETTINGS › MIC MODE
The setup guide, the same on every unitOFFSetEvery unitConfirm by hand
Switching
Advanced menu (OSD) or Input Select web page- AUTO-SYNC OFFAdvanced menu (OSD) or Input Select web page › Advanced › AUTO-SYNC OFF
The setup guide, the same on every unitSLOW (about 2 minutes)SetEvery unitConfirm by hand - AUTO SWITCHINGAdvanced menu (OSD) or Input Select web page › Advanced › AUTO SWITCHING
The setup guide, the same on every unitLast connectedSetEvery unitConfirm by hand
Security
Device Settings web page › Authentication- Authenticate Web Pages accessDevice Settings web page › Authentication
The setup guide, the same on every unitOnSetEvery unitConfirm by hand - Web pages user name and passwordDevice Settings web page › Authentication
From the password vault,
The password vault. The secret itself is never shown here.Copenhagen office / AV / Kramer VP-440H2 / Web pages user name and passwordSetThis unitConfirm by hand
Firmware
Device Settings web page- Firmware update methodDevice Settings web page
The setup guide, the same on every unitManual upload only, no automatic-update toggle existsCheckEvery unitConfirm by hand
HDCP
HDCP web page (or Advanced › HDCP ON INPUT/OUTPUT on the OSD)- HDCP on inputs (HDBT, HDMI1-3)HDCP web page (or Advanced › HDCP ON INPUT/OUTPUT on the OSD) › Advanced › HDCP ON INPUT
The setup guide, the same on every unitON for every inputSetEvery unitConfirm by hand - HDCP on outputs (HDMI OUT, HDBT OUT)HDCP web page (or Advanced › HDCP ON INPUT/OUTPUT on the OSD) › Advanced › HDCP ON OUTPUT
The setup guide, the same on every unitInput (only encrypt the output when the active input is encrypted)SetEvery unitConfirm by hand
EDID
EDID web page (or Advanced › EDID MANAGE on the OSD)- EDID source for each inputEDID web page (or Advanced › EDID MANAGE on the OSD) › Advanced › EDID MANAGE
The setup guide: the same instruction on every unitCopy the connected display's own EDID to every inputSetEvery unitConfirm by hand
No setting matches these filters.