Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Projects is switched off
Projects, the schedule, planning, the work plan and the Lab. This demo has the Projects module switched off in Organisation settings.
Build sheetBatch 7 of 16Project PRJ-22Simulated live
3.03 Heron ptz camera facing the audience
1 value not recorded yet · 9 settings to set, 8 to checkchecked just now
Asset register
Assetbox › Assets- Asset tagAssetbox › Assets
The install recordAG-000281CheckThis unitNot seen yet - Serial numberAssetbox › Assets
The install recordDEMO-DUB-000281CheckThis unitNot seen yet - ModelAssetbox › Assets
The space typePoly Studio E60CheckEvery unitNot seen yet - LocationAssetbox › Assets
The spaceDublin office, 3.03 HeronSetThis unitNot seen yet
Switch port
Network controller › Ports- VLAN (native, untagged)Network controller › Ports
The network standard: VLAN by purpose30 Room systemsSetEvery unitNot seen yet - PortNetwork controller › Ports
The port it is patched to (simulated)dub-303-sw01 port 2CheckThis unitNot seen yet
Firmware
Where the setup guide updates it- Firmware versionWhere the setup guide updates it
Not recordedNo fleet standard firmware for this model yet. The configuration was checked on Poly VideoOS 4.6.0 (host); Studio E60 camera software 1.1.3.6+; Studio E70 camera software 1.12.0+ for IP LLN.
CheckEvery unitNot checked
IP LLN pairing (Studio X72 and Studio G62 only)
Host system's web interface › General Settings › Device Management- PairHost system's web interface › General Settings › Device Management › Available Devices
Heron video codec. As written: The camera with this space's MAC address.What it pairs with in 3.03 Herondub-303-vc01SetThis unitNot read back yet - Power for the LLN connectionHost system's web interface › General Settings › Device Management
The setup guide, the same on every unitThe camera's own adapter, a PoE/PoE+ injector, or a Netgear ProAV M4250-9G1F-PoE+ switch for more than one IP cameraSetEvery unitNot read back yet
Framing and image
Host system's web interface › Audio/Video › Video Inputs- Framing SizeHost system's web interface › Audio/Video › Video Inputs
The setup guide, the same on every unitMediumCheckEvery unitNot read back yet - White BalanceHost system's web interface › Audio/Video › Video Inputs
The setup guide, the same on every unitAutoCheckEvery unitNot read back yet
Tracking
Host system's web interface › Audio/Video › Video Inputs- Tracking ModeHost system's web interface › Audio/Video › Video Inputs
The setup guide, the same on every unitFrame GroupSetEvery unitNot read back yet - Tracking ModeHost system's web interface › Audio/Video › Video Inputs
The setup guide, the same on every unitFrame PresenterSetEvery unitNot read back yet - Tracking EnabledHost system's web interface › Audio/Video › Video Inputs
The setup guide, the same on every unitOnSetEvery unitNot read back yet
General camera settings
Host system's web interface › Audio/Video › Video Inputs › General Camera Settings- Allow Other Participants in a Call to Control Your CameraHost system's web interface › Audio/Video › Video Inputs › General Camera Settings
The setup guide, the same on every unitOffSetEvery unitNot read back yet - Camera sleep modeHost system's web interface › Audio/Video › Video Inputs › General Camera Settings
The setup guide, the same on every unitLeave at whatever Google Meet Partner Mode setsCheckEvery unitNot read back yet - Enable User Camera SelectionHost system's web interface › Audio/Video › Video Inputs › General Camera Settings
The setup guide, the same on every unitOnSetEvery unitNot read back yet
No setting matches these filters.