Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Locations is switched off
Regions, offices, floors and the spaces in them. This demo has the Locations module switched off in Organisation settings.
Meeting and collaborationIndustry guidance
Hybrid meeting room
9 spaces built to it · 5 open incidents
- 6 to 8People
- 33 to 37m²
- 1Build option
- 9Spaces built to it
Drawn to scale · 6.60 × 5.20 m, 34.3 m² · 8 seats · Outlets: plain outlets (a space type has no country); floor boxes with a 300 mm lid · C-shaped table 4.8 × 1.6 m, nearest edge 1.45 m from the display wall
Outlets
Power for the space's kit is never on a light switch, so nothing turns it off (house assumption).
Wiring
15 signal cables, 15 to outletsShown with every optional device fitted. Each space page shows its own.
List every cable
| Cable | From | To |
|---|---|---|
| HDMI | Video bar, hdmi-out-1 | Display 1, hdmi-in-1 |
| HDMI | Video bar, hdmi-out-2 | Display 2, hdmi-in-1 |
| Cat 6A | HDBaseT transmitters, one per side table 1, hdbaset-1 | HDBaseT receivers 1, hdbaset-1Direct cable run 1 |
| Cat 6A | HDBaseT transmitters, one per side table 2, hdbaset-1 | HDBaseT receivers 2, hdbaset-1Direct cable run 2 |
| USB-C | HDBaseT transmitters, one per side table 1, usb-c-1 | LaptopLeft side table |
| USB-C | HDBaseT transmitters, one per side table 2, usb-c-1 | LaptopRight side table |
| HDMI | HDBaseT receivers 1, hdmi-out-1 | Chooses between the laptop inputs, hdmi-in-2 |
| HDMI | HDBaseT receivers 2, hdmi-out-1 | Chooses between the laptop inputs, hdmi-in-3 |
| USB | HDBaseT receivers 1, usb-b-1 | Chooses between the laptop inputs, usb-b-2 |
| USB | HDBaseT receivers 2, usb-b-1 | Chooses between the laptop inputs, usb-b-3 |
| HDMI | Chooses between the laptop inputs, hdmi-out-1 | Video bar, hdmi-in-1 |
| USB | Chooses between the laptop inputs, usb-a-2 | Video bar, usb-c-1Device mode |
| Cat 6 | Chooses between the laptop inputs, lan-1 | In-room network switch, lan-2The switch powers the switcher (PoE) |
| Cat 6 | Video bar, lan-2 | In-room network switch, lan-1Link-local network for Poly IP accessories |
| Cat 6 | In-room network switch, lan-9 | Data outlet 2, behind the displayUplink |
| Cat 6 | Video bar, lan-1 | Data outlet 5, behind the display |
| Cat 6 | Display 1, lan-1 | Data outlet 1, behind the display |
| Cat 6 | Display 2, lan-1 | Data outlet 4, behind the display |
| Poly microphone | Microphone 1, mic-1 | Video bar, mic-1The second microphone chains from the first (house assumption) |
| Cat 6 | Touch controller, lan-1 | Data outlet 1, below the table |
| Cat 6 | Scheduler panel, lan-1 | Data outlet 1, at the door |
| Power | Display 1, power-in | Power outlet 1, behind the display |
| Power | Video bar, power-in | Power outlet 2, behind the display |
| Power | HDBaseT receivers 1, power-in | Power outlet 3, behind the display |
| Power | Chooses between the laptop inputs, power-in | Power outlet 4, behind the display |
| Power | Display 2, power-in | Power outlet 5, behind the display |
| Power | HDBaseT receivers 2, power-in | Power outlet 6, behind the display |
| Power | In-room network switch, power-in | Power outlet 7, behind the display |
| Power | HDBaseT transmitters, one per side table 1, power-in | Power outlet 1, below the table |
| Power | HDBaseT transmitters, one per side table 2, power-in | Power outlet 2, below the table |