Keia Atlas

Vendor access

This part is for Aigna staff

Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.

Go to your installation

Module

Locations is switched off

Regions, offices, floors and the spaces in them. This demo has the Locations module switched off in Organisation settings.

Organisation settings

RechargeIndustry guidance

Pantry

8 spaces built to it · no open incidents

MillworkCoffee machineWall cabinetsFridge4. HDBaseT receiver at the display, Kramer TP-580Rxr · Behind the display2. Signage player, BrightSign XT1145 · Behind the displayPlate A: Wall plate behind the display. 4 plain sockets, 3 data ports. Power 1: Display Power 2: signage player Power 3: Switcher and scaler between the signage player and a laptop Power 4: HDBaseT receiver at the display Data 1: Display Data 2: Signage player Data 3: sparePlate A: Wall plate behind the display. 4 plain sockets, 3 data ports. Power 1: Display Power 2: signage player Power 3: Switcher and scaler between the signage player and a laptop Power 4: HDBaseT receiver at the display Data 1: Display Data 2: Signage player Data 3: spareIsland, bar height5. Switcher and scaler between the signage player and a laptop, Kramer VP-440H2 · Behind the display1. Display (65 in shown) · Display wall3. Wall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT, Kramer WP-20CT · Set per projectPlate B: Wall plate on the wall, where the project puts it. 1 plain socket, 1 data port. Power 1: Wall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT Data 1: wall plate for a laptop (optional)Plate B: Wall plate on the wall, where the project puts it. 1 plain socket, 1 data port. Power 1: Wall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT Data 1: wall plate for a laptop (optional)PlantPlantPlant1.52 m (60 in)Track behind the displaySkirting trunkingWall riser, up to the trackPlate A: cabled up inside the wall to the ceiling above the door, back to the comms roomPlate B: cabled up inside the wall to the ceiling above the door, back to the comms roomHDMI: Signage player HDMI out to Switcher and scaler between the signage player and a laptop HDMI in 1, via the track behind the displayHDMI: Switcher and scaler between the signage player and a laptop HDMI out to Display HDMI in, via the track behind the displayCat 6A: Wall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT HDBaseT to HDBaseT receiver at the display HDBaseT, via the skirting trunking, the wall riser and the track behind the displayHDMI: HDBaseT receiver at the display HDMI out to Switcher and scaler between the signage player and a laptop HDMI in 2, via the track behind the displayCat 6: Display LAN to plate A, data 1, via the track behind the displayCat 6: Signage player LAN to plate A, data 2, via the track behind the displayPower: Display power to plate A, power 1, via the track behind the displayPower: Switcher and scaler between the signage player and a laptop power to plate A, power 3, via the track behind the displayPower: HDBaseT receiver at the display power to plate A, power 4, via the track behind the displayPower: Wall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT power to plate B, power 1, plugged in beside itWhere the data comes in: above the door, from the floor's comms room1. Display13. Wall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT3Plate B: Wall plate on the wall, where the project puts it. 1 plain socket, 1 data port. Power 1: Wall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT Data 1: wall plate for a laptop (optional)B2. Signage player, behind the display24. HDBaseT receiver at the display, behind the display45. Switcher and scaler between the signage player and a laptop, behind the display5Plate A: Wall plate behind the display. 4 plain sockets, 3 data ports. Power 1: Display Power 2: signage player Power 3: Switcher and scaler between the signage player and a laptop Power 4: HDBaseT receiver at the display Data 1: Display Data 2: Signage player Data 3: spareA

Drawn to scale · 8.50 × 6.55 m, 55.7 m² · 8 seats · Outlets: plain outlets (a space type has no country), 450 mm up to the centre (house default; the space type gives no height) · Millwork, bar-height island with 60 in clearance · Signage display 43 to 85 in, 65 in shown

Outlets

4Power, behind the displaydisplay, signage player, spare, spareIT
3Data, behind the displaydisplay, signage player, spareIT
1Data, set per projectwall plate for a laptop (optional)Terminated as a plug so the installer can test itIT
1Power, set per projectwall plate (optional)The wall plate draws 5 V DC at 390 mAIT

Power for the space's kit is never on a light switch, so nothing turns it off (house assumption).

Wiring

5 signal cables, 6 to outlets
VideoHDBaseTUSB

Shown with every optional device fitted. Each space page shows its own.

Where it startsCarried, switched and processedWhere it endsHDMI: Signage player, hdmi-out-1 to Switcher and scaler between the signage player and a laptop, hdmi-in-1HDMI: Switcher and scaler between the signage player and a laptop, hdmi-out-1 to Display, hdmi-in-1Cat 6A: Wall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT, hdbaset-1 to HDBaseT receiver at the display, hdbaset-1HDMI: HDBaseT receiver at the display, hdmi-out-1 to Switcher and scaler between the signage player and a laptop, hdmi-in-2USB-C: Wall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT, usb-c-1 to LaptopSignage player, BrightSign XT1145Signage playerBrightSign XT1145hdmi-out-1 · HDMINetwork, behind the display #2Network, behind the di…Switcher and scaler between the signage player and a laptop, Kramer VP-440H2Switcher andscaler between…Kramer VP-440H2hdmi-in-1 · HDMIhdmi-in-2 · HDMIhdmi-out-1 · HDMIPower, behind the display #3Power, behind the disp…Display, Model set per projectDisplayModel set per projecthdmi-in-1Network, behind the display #1Network, behind the di…Power, behind the display #1Power, behind the disp…Wall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT, Kramer WP-20CTWall plate wherea laptop plugs…Kramer WP-20CTusb-c-1 · USB-Chdbaset-1 · RJ45Power, set per project #1Power, set per project…HDBaseT receiver at the display, Kramer TP-580RxrHDBaseT receiverat the displayKramer TP-580Rxrhdbaset-1 · RJ45hdmi-out-1 · HDMIPower, behind the display #4Power, behind the disp…Laptop, The person's ownLaptopThe person's owncable
List every cable
CableFromTo
HDMISignage player, hdmi-out-1Switcher and scaler between the signage player and a laptop, hdmi-in-1
HDMISwitcher and scaler between the signage player and a laptop, hdmi-out-1Display, hdmi-in-1
Cat 6AWall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT, hdbaset-1HDBaseT receiver at the display, hdbaset-1
HDMIHDBaseT receiver at the display, hdmi-out-1Switcher and scaler between the signage player and a laptop, hdmi-in-2
USB-CWall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT, usb-c-1Laptop
Cat 6Display, lan-1Data outlet 1, behind the display
Cat 6Signage player, lan-1Data outlet 2, behind the displayPoE+ powers the player
PowerDisplay, power-inPower outlet 1, behind the display
PowerSwitcher and scaler between the signage player and a laptop, power-inPower outlet 3, behind the display
PowerHDBaseT receiver at the display, power-inPower outlet 4, behind the display
PowerWall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT, power-inPower outlet 1, set per project

Spaces built to it

8 spaces
13.15 PantryChicago office, Chicago4.02 PantryCopenhagen office, Copenhagen4.15 PantryDublin office, Dublin2.01 PantryJuneau office, Juneau8.02 PantryMelbourne office, Melbourne21.18 PantryNew York office, New York22.17 PantryNew York office, New York15.02 PantryTokyo office, Tokyo

View as

See Keia Atlas the way someone else does. A demo: nobody signs in.

Viewing asAnna ByrneAV and IT delivery engineer · EMEA

Suggested

Delivery

  • Delivery engineerDesigns and commissions spaces, from survey to handover
  • Project managerRuns projects day to day: dates, suppliers and who does what
  • On-site technicianInstalls and fixes kit in the offices
  • Programme managerPlans the year of projects across every region
  • Engineering managerLeads the delivery engineers
  • Project management leadLeads the project managers
  • On-site services managerLeads the on-site technicians
  • Delivery managerThe whole delivery team, every region

Support and service

  • Service desk analystTakes incidents as they arrive and routes them
  • Network engineerPorts, VLANs and patching
  • Service manager, AVOwns the AV standard and its service
  • Service manager, networkOwns the network standard and its service

The Lab

  • Innovation engineerTests new kit before it ships

Leadership

  • Head of AV and ITThe whole service, every region

Partners

  • Integration vendorSees their own installations only
  • Service vendorRepairs under the service contract

Overview

  • EveryoneEvery role's first screen at once, to see the whole picture

Settings

Appearance
LookStudio
Text size
Default

Report

Tell the team

About Pantry

Goes to Sofia Reyes, Service manager, AV. Reviewed within five working days.