Identity and networkDevice web interface

• SetDevice NameDevice › General › General PreferencesThe hostnamePer deviceMatches DNS, device management and monitoring, so one name finds the device everywhere.source
• VerifyIP ModeDevice › General › NetworkDHCP (default), with a reservation on the AV VLANAigna's AV devices sit on a DHCP-reserved address on the AV VLAN rather than a hand-typed static one.source

SecuritySecurity page

• VerifySecurity StatusSecurity › SecurityOn (default)Keeps the web pages behind a login instead of open to anyone on the AV VLAN.source
• SetWeb Pages Access PasswordSecurity › SecurityFrom the password vault, per sitePer deviceThe device ships with Admin/Admin, which must be changed before the switcher goes into service.source
• Set802.1X AuthenticationSecurity › 802.1XOffAigna's AV ports authenticate devices at the switch instead of at the endpoint.source

AV settingsAV Settings > Audio Video Settings page

• VerifyHDCP (per input)Yes (default) on all inputsLets any HDCP-protected source play through without the installer having to touch it per space.source
• VerifyHDCP (output)Follow Input (default)Only encrypts the output when the active input needs it, which keeps unprotected sources compatible with older displays.source
• VerifyColor Depth Force 8BitsDisable (default)Leaves full colour depth in place; only used to force compatibility with a difficult display.source
• VerifyForce LPCM 2CHDisable (default)Lets multi-channel or compressed audio through unchanged for Aigna's standard Google Meet audio path.source
• VerifyForce RGB on OutputDisable (default)Leaves the native colour space in place for the connected display.source
• VerifyAuto Sleep DelayEnabled (default)Lets the output go to sleep after a signal loss instead of holding the display awake indefinitely.source
• VerifyNo input signal (sleep timeout)900 seconds (default)Gives a space enough time between meetings before the output sleeps, without leaving it on all day.source
• SetAnalog output volumeRouting Settings › Analog OutputsThe room's calibrated listening levelPer deviceThe slider has no stated factory value; it's set to match each space's speakers during commissioning.source

RoutingRouting / AV Settings pages

• SetAuto-switching Selection ModeAV Settings › Auto switchingPriority, with the USB-C laptop input (Input 1) highestAigna's rooms are BYOM-first; plugging in a laptop should always win over an idle HDMI input.source
• SetUSB Host RoutingRouting Settings › Routing PageUSB follows AV coupled routingKeeps the active video input's USB peripherals (camera, soundbar) tied together, which is simpler for a space with one laptop at a time.source

Control and timeControl Gateway / Device > General pages

• VerifySerial Port TunnelingControl Gateway › Serial PortsControl (RS-232 controls the SWT3-31-HU itself)Aigna's rooms don't chain a separate serially-controlled device off this switcher.source
• SetUse Time Server (NTP)Device › General › Time and DateManualUse Aigna's own time servers rather than whatever the network offers.source
• SetTime server addressDevice › General › Time and Datentp1.aigna.exampleKeeps the switcher's clock, and its device logs, aligned with the rest of the space's equipment.source
• SetSync frequencyDevice › General › Time and Date1 dayKeeps the clock accurate without polling the time server unnecessarily often.source

FirmwareDevice > General page

• VerifyFirmware update methodManual upload only, no automatic-update toggle existsThere's nothing to turn off; firmware only changes when an installer manually uploads a file, which already matches Aigna's Lab-first policy.source