Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Assets is switched off
Device types, units, models, setup guides, standards, IT stores and cables. This demo has the Assets module switched off in Organisation settings.
Setup guideAdapterStand-aloneSimulated
Poly PoE++ 65W 2.5G injector
Every unit in use matches itchecked just now
Configuring happens in a project's Deploy page
Each device is provisioned, installed, configured in this setup order and commissioned there, ticked off with who and when. This page is the standard it follows.
No project is configuring it now. Every project
On the units running it
- Units in service
- 19
- Records drifted
- None
A practice run. A new install, in order. Ticks stay on this browser. The real run is ticked device by device in a project's Deploy page.
0 of 4A single-port mains-powered PoE++ midspan injector with no user settings; there's nothing to configure beyond cabling and mains power.
VerificationN/A: no interface, physical checks only
- VerifyPoE outputUp to 65W, 802.3af/at/bt compliant per HP/PolyConfirms the injector can supply what a Studio X32 or V12 draws, with no configuration needed to reach that budget.source
- VerifyIncluded CAT6A cable3.66m, used between the injector and the barConfirms the 2.5Gb/s link and PoE both run over the cable Poly supplies in the box, rather than a substitute patch cable.source
- VerifyMains power cordThe included cord, seated fully at both endsThe only power path for the unit; there's no PoE pass-through or DC input to configure instead.source
What the vendor's documents don't say (2)
- No datasheet or panel drawing was found for this model, so port labels, faces and any status LEDs are undocumented.
- No source states the mains inlet type (detachable IEC cord or captive lead), only that a power cable is boxed separately.
Provision is the first step of Deploy: before or as each adapter arrives, every system gets its record, so the device is known the moment it is plugged in. It is ticked in the project's Deploy page; this is what each record needs.
Firmware
Not versioned
No version is named for this setup guide.
Licence and management
No licence named in this setup guide.
Managed in: None: no settings.
AssetboxAsset register
assets/<asset tag>.json
Needs
- Asset tag
- Serial
- Model
- Space
- Status
Healthy when status is active; space matches where the device is installed.
InfoDNSAddresses and DNSNot used
No record: adapter units are not kept in InfoDNS.
Fleet LensDevice managementNot used
No record: adapter units are not kept in Fleet Lens.
AppStateRoom booking and signage fleetNot used
No record: adapter units are not kept in AppState.
Monitor DogMonitoringNot used
No record: adapter units are not kept in Monitor Dog.
Where AG-000372 (4.03 Wren, Dublin office) is recorded in each system, against what Keia Atlas expects. Simulated values.-found +expected
AssetboxAsset registerIn sync
# assets/AG-000372.json asset_tag: AG-000372 serial: DEMO-DUB-000372 model: Poly PoE++ 65W 2.5G Adapter location: Dublin office, 4.03 Wren status: In service
InfoDNSAddresses and DNSNot used
No record: adapters are not kept in InfoDNS.
Fleet LensDevice managementNot used
No record: adapters are not kept in Fleet Lens.
DarkSignSignage playersNot used
No record: adapters are not kept in DarkSign.
AppStateRoom booking and signage fleetNot used
No record: adapters are not kept in AppState.
Monitor DogMonitoringNot used
No record: adapters are not kept in Monitor Dog.
Being configured now
In each project's Deploy pageNo project is configuring it now.
Units running it
19 in service · 0 drifted · simulated check| Unit | Space | Office | Model | Status | Records |
|---|---|---|---|---|---|
| Wren adapter | 13.05 Wren | Chicago office | Poly PoE++ 65W 2.5G Adapter | In service | In sync |
| Robin adapter | 13.06 Robin | Chicago office | Poly PoE++ 65W 2.5G Adapter | In service | In sync |
| Wren powers the video bar | 4.09 Wren | Copenhagen office | Poly PoE++ 65W 2.5G Adapter | In service | In sync |
| Wren adapter | 4.03 Wren | Dublin office | Poly PoE++ 65W 2.5G Adapter | In service | In sync |
| Robin adapter | 4.04 Robin | Dublin office | Poly PoE++ 65W 2.5G Adapter | In service | In sync |
| Goldcrest powers the video bar | 4.05 Goldcrest | Dublin office | Poly PoE++ 65W 2.5G Adapter | In service | In sync |
| Stonechat adapter | 4.06 Stonechat | Dublin office | Poly PoE++ 65W 2.5G Adapter | In service | In sync |
| Wren powers the video bar | 2.04 Wren | London office | Poly PoE++ 65W 2.5G Adapter | In service | In sync |
| Robin powers the video bar | 2.05 Robin | London office | Poly PoE++ 65W 2.5G Adapter | In service | In sync |
| Wren adapter | 8.09 Wren | Melbourne office | Poly PoE++ 65W 2.5G Adapter | In service | In sync |
| Wren adapter | 21.06 Wren | New York office | Poly PoE++ 65W 2.5G Adapter | In service | In sync |
| Robin adapter | 21.07 Robin | New York office | Poly PoE++ 65W 2.5G Adapter | In service | In sync |
| Goldcrest powers the video bar | 21.08 Goldcrest | New York office | Poly PoE++ 65W 2.5G Adapter | In service | In sync |
| Wren powers the video bar | 12.04 Wren | Singapore office | Poly PoE++ 65W 2.5G Adapter | In service | In sync |
| Robin powers the video bar | 12.05 Robin | Singapore office | Poly PoE++ 65W 2.5G Adapter | In service | In sync |
| Wren adapter | 15.08 Wren | Tokyo office | Poly PoE++ 65W 2.5G Adapter | In service | In sync |
| Robin adapter | 15.09 Robin | Tokyo office | Poly PoE++ 65W 2.5G Adapter | In service | In sync |
| Wren powers the video bar | 7.04 Wren | Toronto office | Poly PoE++ 65W 2.5G Adapter | In service | In sync |
| Robin powers the video bar | 7.05 Robin | Toronto office | Poly PoE++ 65W 2.5G Adapter | In service | In sync |