Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Each device is provisioned, installed, configured in this setup order and commissioned there, ticked off with who and when. This page is the standard it follows.
A practice run. A new install, in order. Ticks stay on this browser. The real run is ticked device by device in a project's Deploy page.
0 of 6
Aigna adopts every remote worker's UX7 into the network team's UniFi console under an Aigna UI account, gives the worker their own isolated network, and leaves it on the official update channel with automatic updates off.
Setchange itVerifythe default is right, check it
AdoptionUniFi Mobile App
SetAdopt deviceAdopt into the worker's site from Pending AdoptionLinks the gateway to the UniFi application that manages it; until adopted it only shows as Pending Adoption and takes no policy.source
SetUI AccountAn Aigna UI account, not a local-only loginEnables remote management from Site Manager and automatic system backups, so the gateway can be supported without a visit to the worker's home.source
WAN and LANUniFi Network app
VerifyWAN port10GbE port (factory default WAN); connect the home internet uplink hereThe 10GbE port is the default WAN port out of the box; Aigna keeps the default rather than reassigning it in software.source
VerifyLAN networkThe worker's own network, DHCP on, over the 2.5GbE portPer deviceThe 2.5GbE port is LAN by default; the worker's own devices reach it over DHCP with no static addressing needed at a home site.source
NetworksUniFi Network app
SetCreate Virtual NetworkSettings › Networks › Create New NetworkOne network per remote worker, VLAN ID from Aigna's naming scheme, DHCP onPer deviceKeeps a remote worker's home network isolated from anything else on their router, the same way a site VLAN would.source
UpdatesUniFi Network app
SetRelease channel and automatic updatesSettings › Control Plane › UpdatesOfficial channel, automatic updates offAigna tests firmware in the Lab before it reaches a remote worker's gateway; the Early Access channel is never used at a home site.source
What the vendor's documents don't say (3)
No documented default admin credentials or password-complexity rule specific to the UX7; it's set up through UI account sign-in rather than a local admin password.
The exact wording of the auto-update toggle (e.g. Off / Notify / All) isn't given by the help article read; only that it lives under Settings > Control Plane > Updates.
The firmware version cited (5.1.12) comes from a community release-notes page title; Ubiquiti doesn't publish a single canonical 'current version' page for this model.
Provision is the first step of Deploy: before or as each home network gateway arrives, every system gets its record, so the device is known the moment it is plugged in. It is ticked in the project's Deploy page; this is what each record needs.
Firmware
5.1.12
5.1.12. Check it before configuring.
Licence and management
No licence named in this setup guide.
Managed in: UniFi Network app.
AssetboxAsset register
assets/<asset tag>.json
Needs
Asset tag
Serial
Model
Space
Status
Healthy when status is active; space matches where the device is installed.
InfoDNSAddresses and DNSNot used
No record: home network gateway units are not kept in InfoDNS.
Fleet LensDevice management
sites/<site>/devices/<hostname>.yaml
Needs
Device name
Serial
Firmware version
Healthy when online in the vendor's cloud management service; firmware at the fleet standard for the model; settings match the setup guide for the model.
AppStateRoom booking and signage fleetNot used
No record: home network gateway units are not kept in AppState.
Monitor DogMonitoringNot used
No record: home network gateway units are not kept in Monitor Dog.
UniFi Mobile App2 of 2 to set or verify2 settings · 5.1.12
UniFi Mobile App › Adoption
SetAdopt deviceAdopt into the worker's site from Pending Adoption
SetUI AccountAn Aigna UI account, not a local-only login
UniFi Network app2 of 2 to set or verify2 settings · 5.1.12
UniFi Network app › WAN and LAN
VerifyWAN port10GbE port (factory default WAN); connect the home internet uplink here
VerifyLAN networkThe worker's own network, DHCP on, over the 2.5GbE port
Settings2 of 2 to set or verify2 settings · 5.1.12
Settings › Networks › Create New Network
SetCreate Virtual NetworkOne network per remote worker, VLAN ID from Aigna's naming scheme, DHCP on
Settings › Control Plane › Updates
SetRelease channel and automatic updatesOfficial channel, automatic updates off
Where AG-001480 (Aurora home office 1, Remote Americas) is recorded in each system, against what Keia Atlas expects. Simulated values.-found +expected
AssetboxAsset registerIn sync
# assets/AG-001480.jsonasset_tag: AG-001480serial: DEMO-RAM-001480model: Ubiquiti UniFi Express 7 (UX7)location: Remote Americas, Aurora home office 1status: In service
Fleet LensDevice managementIn sync
# sites/ram/devices/DEMO-RAM-001480.yamlname: DEMO-RAM-001480firmware: not trackedpolicy: Remote Americas site
InfoDNSAddresses and DNSNot used
No record: home network gateways are not kept in InfoDNS.
DarkSignSignage playersNot used
No record: home network gateways are not kept in DarkSign.
AppStateRoom booking and signage fleetNot used
No record: home network gateways are not kept in AppState.
Monitor DogMonitoringNot used
No record: home network gateways are not kept in Monitor Dog.
Type the way you would ask a colleague. Keia Atlas picks out what you want, where, which model and which status, and shows each as a chip you can remove or change.