Curlew displayModel set per project · nyc-2005-dsp01 · Display wall
Viewing as , ,
Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Projects is switched off
Projects, the schedule, planning, the work plan and the Lab. This demo has the Projects module switched off in Organisation settings.
Task T-1210Configure · Deploy phasePRJ-12 New York office video bar refreshTo doSimulated
Configure Curlew's video bar in its setup order
To do · due in 7 dayschecked just now
- 26 OctDue in 7 days
- 3 hEstimate
- 0/5Steps done
What to do
From the AV refresh playbook, Deploy phase: "Configure each device in its setup order, then set and verify its settings".
The phase is done when: Every space in the batch installed; Every space passes, or its snags are accepted.
The space
- 20.05 CurlewLarge meeting room
Assign to
How it closed
Closing a task needs one of these. It takes under 30 seconds.
The devices
8 in this roomCurlew displayModel set per project · nyc-2005-dsp02 · Display wall
Curlew video barPoly Studio X72 · nyc-2005-vc01 · Display wall
Curlew touch controllerPoly TC10 · nyc-2005-tc01 · On the desk
Curlew hDBaseT transmitterKramer EXT3-C-XR-T · Below the table
Curlew hDBaseT receiver at the displayKramer EXT3-POE-XR-R · Behind the display
Curlew microphonePoly Studio Expansion Microphone · On the desk
Curlew scheduler panelLogitech Tap Scheduler · nyc-2005-sch01 · At the door