Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Projects is switched off
Projects, the schedule, planning, the work plan and the Lab. This demo has the Projects module switched off in Organisation settings.
Batch 6 of 8 · Project PRJ-14Simulated live
2 Dell Pro P 27 USB-C Hub Conferencing Monitors
All 2 units set up · nothing to reviewchecked just now
Setup is done by Aigna's engineers. Your installs are on the Deploy page.
Once for all 2
Through Monitor OSDSet on each unit by hand Monitor OSD. Keia Atlas cannot read these back, so a person confirms them.
2 settings to set and 2 to check; 0 left at the manufacturer's default.See every settingThe setup guide
The same on every unit
- Auto Select
- On, with the option for USB-C set to Prompt for Multiple Inputs
- USB
- Other USB Charging: On in standby
The units
Only what differs per unit. Each unit's build sheet has every setting worked out.Nothing is ready for you here. Keia Atlas keeps checking these units.
| Unit | Provision | Install | Configure | |
|---|---|---|---|---|
| Build sheet | ||||
| Build sheet | ||||
Setup order
Optional: tick as you go, or let the checks do it1Connect the laptop to the USB-C 90W port for video, data and up to 90 W charging in one cable.2/2
2Open the OSD and set Input Source > Auto Select on, with the USB-C option set to prompt for multiple inputs.2/2
3Leave DDC/CI on so Dell Display Manager can adjust brightness and input remotely.2/2
4Turn on Other USB Charging so downstream USB devices keep charging while the monitor is in standby.2/2
5Run Reset Input Source if the monitor was used for anything else before, then apply the above.2/2
6Run the desk's verification.2/2
Every setting
4 in the setup guide, as patternsValues marked Per unit are patterns here. Each unit's build sheet has them worked out: 2.04 Focus 2.04, 2.05 Focus 2.05.
Input Source2
- Auto SelectInput Source > Auto SelectSet to On, with the option for USB-C set to Prompt for Multiple Inputs
Why
Switches to whichever cable is live without the user hunting through the input menu, but still asks if two inputs are connected at once so it doesn't flip mid-call.
- Reset Input SourceInput Source > Reset Input SourceCheck it is Run once at install
Why
Clears whatever a previous desk or the factory floor left set, before Aigna's own values are applied.
Personalize1
- USBPersonalize > USBSet to Other USB Charging: On in standby
Why
Lets a phone or headset plugged into the monitor's hub keep charging while the laptop is asleep, without the laptop itself staying awake.
Others1
- DDC/CIOthers > DDC/CICheck it is On (vendor default)
Why
Dell Display Manager needs DDC/CI on to set brightness and input remotely; Aigna just confirms it hasn't been turned off.