Vendor access

This part is for Aigna staff

Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.

Go to your installation

Module

Projects is switched off

Projects, the schedule, planning, the work plan and the Lab. This demo has the Projects module switched off in Organisation settings.

Organisation settings

Task T-1407Install · Deploy phasePRJ-14 Juneau office fit-outTo doSimulated

Flex desks docked and tested

To do · due in 11 dayschecked just now

30 OctDue in 11 days
8 hEstimate
0/5Steps done

Open in Deploy

On the Deploy board8 devices, each with its Install checklist to tick, live with the rest of the team.Open in Deploy

What to do

Book the space out for the time the install needs.
Check the firmware on the unit against the standard. Newer than the standard? Don't update or roll back: use Report, New firmware found.
Mount each device where the space type puts it, and connect it as the wiring shows.
Power on and check each device takes its reserved address.
Keep the position and hostname; retire any old unit in the asset register the same day.

The phase is done when: Everything installed to the design; Vendor records checked; Every space passes, or its snags are accepted.

The space

2.07 Flex desks AHot desk