Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Locations is switched off
Regions, offices, floors and the spaces in them. This demo has the Locations module switched off in Organisation settings.
Meeting and collaborationHouse standard
Briefing auditorium
1 space built to it · no open incidents
- 40 to 60People
- 100 to 130m²
- 1Build option
- 1Space built to it
Drawn to scale · 6.40 × 18.00 m, 115.2 m² · 54 seats · Outlets: plain outlets (a space type has no country), 450 mm up to the centre (house default; the space type gives no height); floor boxes with a 300 mm lid · Presenter table at the front, nine rows of six seats with a centre aisle, standing room at the back (house choice)
Outlets
Wiring
18 signal cables, 15 to outletsShown with every optional device fitted. Each space page shows its own.
List every cable
| Cable | From | To |
|---|---|---|
| HDMI | Video codec, hdmi-out-1 | HDBaseT transmitter for each display, in the AV rack 1, hdmi-in-1 |
| Cat 6A | HDBaseT transmitter for each display, in the AV rack 1, hdbaset-1 | HDBaseT receiver at each display 1, hdbaset-1Structured cable from the control room to the display |
| HDMI | HDBaseT receiver at each display 1, hdmi-out-1 | Display 1, hdmi-in-1 |
| HDMI | Video codec, hdmi-out-2 | HDBaseT transmitter for each display, in the AV rack 2, hdmi-in-1 |
| Cat 6A | HDBaseT transmitter for each display, in the AV rack 2, hdbaset-1 | HDBaseT receiver at each display 2, hdbaset-1Structured cable from the control room to the display |
| HDMI | HDBaseT receiver at each display 2, hdmi-out-1 | Display 2, hdmi-in-1 |
| Cat 6 | Display 1, lan-1 | Data outlet 1, behind the display |
| Cat 6 | Wide camera over the audience, for questions, lan-1 | Data outlet 2, behind the display |
| Cat 6 | Display 2, lan-1 | Data outlet 4, behind the display |
| Cat 6 | Video codec, lan-1 | In-room network switch, lan-1The switch powers the codec (PoE+) |
| Cat 6 | Video codec, lan-2 | In-room network switch, lan-2Link-local network for Poly IP peripherals |
| Cat 6 | Microphone 1, lan-1 | In-room network switch, lan-3 |
| Cat 6 | Microphone 2, lan-1 | In-room network switch, lan-4 |
| Cat 6 | Microphone 3, lan-1 | In-room network switch, lan-5 |
| Cat 6 | Microphone 4, lan-1 | In-room network switch, lan-6 |
| Cat 6 | Amplifier, lan-1 | In-room network switch, lan-7 |
| Cat 6 | In-room network switch, lan-9 | Data outlet 3, behind the displayUplink |
| Cat 6 | PTZ camera on the back wall, following the presenter, lan-1 | Data outlet 1, set per project |
| Cat 6 | Touch controller, lan-1 | Data outlet 1, below the table |
| Cat 6 | Microphone, lan-1 | Data outlet 2, below the table |
| Cat 6A | HDBaseT transmitter, hdbaset-1 | HDBaseT receiver for the presenter's laptop, hdbaset-1In direct cable run 1, floor box to display wall |
| USB-C | HDBaseT transmitter, usb-c-1 | LaptopThe cable the presenter plugs their laptop into |
| HDMI | HDBaseT receiver for the presenter's laptop, hdmi-out-1 | Video codec, hdmi-in-1 |
| Audio | Video codec, audio-out-1 | Amplifier, audio-in-1 |
| Speaker | Amplifier, speaker-out-1 | Loudspeaker 1, speaker-in-1The eight speakers are chained from the amplifier in two zones, front and back |
| Cat 6 | Scheduler panel, lan-1 | Data outlet 1, at the door |
| Power | Display 1, power-in | Power outlet 1, behind the display |
| Power | HDBaseT receiver at each display 1, power-in | Power outlet 2, behind the display |
| Power | HDBaseT receiver for the presenter's laptop, power-in | Power outlet 3, behind the display |
| Power | Display 2, power-in | Power outlet 4, behind the display |
| Power | HDBaseT receiver at each display 2, power-in | Power outlet 5, behind the display |
| Power | HDBaseT transmitter, power-in | Power outlet 1, below the table |
| Power | PTZ camera on the back wall, following the presenter, power-in | Power outlet 1, set per project |