Viewing as , ,
Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Locations is switched off
Regions, offices, floors and the spaces in them. This demo has the Locations module switched off in Organisation settings.
- 12 to 16People
- 33.4 to 44.6m²
- 4Build options
- 7Spaces built to it
Drawn to scale · 4.60 × 9.70 m, 44.6 m² · 16 seats · Outlets: plain outlets (a space type has no country); floor boxes with a 300 mm lid · Table 6.0 × 1.4 m (house choice)
Outlets
Power for the space's kit is never on a light switch, so nothing turns it off (house assumption).
Wiring
9 signal cables, 10 to outletsVideoHDBaseTUSBVendor cableAudio
Shown with every optional device fitted. Each space page shows its own.
List every cable
| Cable | From | To |
|---|---|---|
| HDMI | Video bar, hdmi-out-1 | Display, hdmi-in-1 |
| Cat 6 | Display, lan-1 | Data outlet 1, behind the display |
| Cat 6 | Video bar, lan-1 | Data outlet 2, behind the display |
| Cat 6 | Touch controller, lan-1 | Data outlet 1, below the table |
| Cat 6A | HDBaseT transmitter, hdbaset-1 | HDBaseT receiver at the display, hdbaset-1In direct cable run 1, floor box to display wall. The receiver powers the transmitter over this cable. |
| USB-C | HDBaseT transmitter, usb-c-1 | LaptopThe table cable people plug their laptop into |
| HDMI | HDBaseT receiver at the display, hdmi-out-1 | Scaler for the whiteboard camera picture, hdmi-in-1 |
| HDMI | Scaler for the whiteboard camera picture, hdmi-out-1 | Video bar, hdmi-in-1 |
| HDMI | USB to HDMI converter for the whiteboard camera, hdmi-out-1 | Scaler for the whiteboard camera picture, hdmi-in-2 |
| Vendor cable | Whiteboard camera, lan-1 | USB to HDMI converter for the whiteboard camera, usb-a-1Up the marker board wall in trunking, along the ceiling to the display wall and down to the camera power box and dongle behind the display |
| USB | HDBaseT receiver at the display, usb-b-1 | Video bar, usb-c-1Laptop USB through to the video bar, for device mode |
| Poly microphone | Microphone, mic-1 | Video bar, mic-1Over direct cable run 2, with the extension kit |
| Cat 6 | Scheduler panel, lan-1 | Data outlet 1, at the door |
| Power | Display, power-in | Power outlet 1, behind the display |
| Power | HDBaseT receiver at the display, power-in | Power outlet 2, behind the display |
| Power | HDBaseT transmitter, power-in | Power outlet 1, below the tableOptional: the transmitter can also run on power from the receiver |
| Power | Video bar, power-in | Power outlet 3, behind the display |
| Power | Scaler for the whiteboard camera picture, power-in | Power outlet 4, behind the display |
| Power | USB to HDMI converter for the whiteboard camera, power-in | Power outlet 5, behind the display |
Spaces built to it
2 spacesDrawn to scale · 4.60 × 9.70 m, 44.6 m² · 16 seats · Outlets: plain outlets (a space type has no country); floor boxes with a 300 mm lid · Table 6.0 × 1.4 m (house choice)
Outlets
Power for the space's kit is never on a light switch, so nothing turns it off (house assumption).
Wiring
10 signal cables, 12 to outletsVideoHDBaseTUSBVendor cableAudio
Shown with every optional device fitted. Each space page shows its own.
List every cable
| Cable | From | To |
|---|---|---|
| HDMI | Video bar, hdmi-out-1 | Display 1, hdmi-in-1 |
| HDMI | Video bar, hdmi-out-2 | Display 2, hdmi-in-1 |
| Cat 6 | Display 1, lan-1 | Data outlet 1, behind the display |
| Cat 6 | Video bar, lan-1 | Data outlet 2, behind the display |
| Cat 6 | Touch controller, lan-1 | Data outlet 1, below the table |
| Cat 6A | HDBaseT transmitter, hdbaset-1 | HDBaseT receiver at the display, hdbaset-1In direct cable run 1, floor box to display wall. The receiver powers the transmitter over this cable. |
| USB-C | HDBaseT transmitter, usb-c-1 | LaptopThe table cable people plug their laptop into |
| HDMI | HDBaseT receiver at the display, hdmi-out-1 | Scaler for the whiteboard camera picture, hdmi-in-1 |
| HDMI | Scaler for the whiteboard camera picture, hdmi-out-1 | Video bar, hdmi-in-1 |
| HDMI | USB to HDMI converter for the whiteboard camera, hdmi-out-1 | Scaler for the whiteboard camera picture, hdmi-in-2 |
| Vendor cable | Whiteboard camera, lan-1 | USB to HDMI converter for the whiteboard camera, usb-a-1Up the marker board wall in trunking, along the ceiling to the display wall and down to the camera power box and dongle behind the display |
| USB | HDBaseT receiver at the display, usb-b-1 | Video bar, usb-c-1Laptop USB through to the video bar, for device mode |
| Poly microphone | Microphone, mic-1 | Video bar, mic-1Over direct cable run 2, with the extension kit |
| Cat 6 | Scheduler panel, lan-1 | Data outlet 1, at the door |
| Power | Display 1, power-in | Power outlet 1, behind the display |
| Power | HDBaseT receiver at the display, power-in | Power outlet 2, behind the display |
| Power | HDBaseT transmitter, power-in | Power outlet 1, below the tableOptional: the transmitter can also run on power from the receiver |
| Cat 6 | Display 2, lan-1 | Data outlet 3, behind the display |
| Power | Display 2, power-in | Power outlet 5, behind the display |
| Power | Video bar, power-in | Power outlet 6, behind the display |
| Power | Scaler for the whiteboard camera picture, power-in | Power outlet 3, behind the display |
| Power | USB to HDMI converter for the whiteboard camera, power-in | Power outlet 4, behind the display |
Spaces built to it
2 spacesDrawn to scale · 4.60 × 9.70 m, 44.6 m² · 16 seats · Outlets: plain outlets (a space type has no country), 450 mm up to the centre (house default; the space type gives no height); floor boxes with a 300 mm lid · Table 6.0 × 1.4 m (house choice)
Outlets
Power for the space's kit is never on a light switch, so nothing turns it off (house assumption).
Wiring
11 signal cables, 9 to outletsVideoHDBaseTNetworkUSBAudio
Shown with every optional device fitted. Each space page shows its own.
List every cable
| Cable | From | To |
|---|---|---|
| HDMI | Video codec, hdmi-out-1 | HDBaseT transmitter for each display, hdmi-in-1 |
| Cat 6A | HDBaseT transmitter for each display, hdbaset-1 | HDBaseT receiver at each display, hdbaset-1Structured cable from the data closet to the display |
| HDMI | HDBaseT receiver at each display, hdmi-out-1 | Display, hdmi-in-1 |
| Cat 6 | Display, lan-1 | Data outlet 1, behind the display |
| Cat 6 | PTZ camera facing the audience, lan-1 | Data outlet 3, behind the displayAudience camera |
| Cat 6 | Video codec, lan-1 | In-room network switch, lan-1The switch powers the codec (PoE+) |
| Cat 6 | Video codec, lan-2 | In-room network switch, lan-2Link-local network for Poly IP peripherals |
| Cat 6 | Microphone, lan-1 | In-room network switch, lan-3 |
| Cat 6 | In-room network switch, lan-9 | Data outlet 4, behind the displayUplink |
| Cat 6 | Microphone, lan-1 | Data outlet 3, below the table |
| Cat 6 | Touch controller, lan-1 | Data outlet 1, below the table |
| Cat 6A | HDBaseT transmitter, hdbaset-1 | HDBaseT receiver at the display, hdbaset-1Table connection over HDBaseT |
| USB-C | HDBaseT transmitter, usb-c-1 | Laptop |
| HDMI | HDBaseT receiver at the display, hdmi-out-1 | Video codec, hdmi-in-1 |
| Audio | Video codec, audio-out-1 | Amplifier, audio-in-1 |
| Speaker | Amplifier, speaker-out-1 | Loudspeaker, speaker-in-1Speakers are chained from the amplifier; the integrator sets how many |
| Cat 6 | Scheduler panel, lan-1 | Data outlet 1, at the door |
| Power | Display, power-in | Power outlet 1, behind the display |
| Power | HDBaseT receiver at each display, power-in | Power outlet 2, behind the display |
| Power | HDBaseT transmitter, power-in | Power outlet 1, below the table |
Spaces built to it
2 spacesDrawn to scale · 4.60 × 9.70 m, 44.6 m² · 16 seats · Outlets: plain outlets (a space type has no country), 450 mm up to the centre (house default; the space type gives no height); floor boxes with a 300 mm lid · Table 6.0 × 1.4 m (house choice)
Outlets
Power for the space's kit is never on a light switch, so nothing turns it off (house assumption).
Wiring
14 signal cables, 12 to outletsVideoHDBaseTNetworkUSBAudio
Shown with every optional device fitted. Each space page shows its own.
List every cable
| Cable | From | To |
|---|---|---|
| HDMI | Video codec, hdmi-out-1 | HDBaseT transmitter for each display 1, hdmi-in-1 |
| Cat 6A | HDBaseT transmitter for each display 1, hdbaset-1 | HDBaseT receiver at each display 1, hdbaset-1Structured cable from the data closet to the display |
| HDMI | HDBaseT receiver at each display 1, hdmi-out-1 | Display 1, hdmi-in-1 |
| HDMI | Video codec, hdmi-out-2 | HDBaseT transmitter for each display 2, hdmi-in-1 |
| Cat 6A | HDBaseT transmitter for each display 2, hdbaset-1 | HDBaseT receiver at each display 2, hdbaset-1Structured cable from the data closet to the display |
| HDMI | HDBaseT receiver at each display 2, hdmi-out-1 | Display 2, hdmi-in-1 |
| Cat 6 | Display 1, lan-1 | Data outlet 1, behind the display |
| Cat 6 | PTZ camera facing the audience, lan-1 | Data outlet 3, behind the displayAudience camera |
| Cat 6 | Video codec, lan-1 | In-room network switch, lan-1The switch powers the codec (PoE+) |
| Cat 6 | Video codec, lan-2 | In-room network switch, lan-2Link-local network for Poly IP peripherals |
| Cat 6 | Microphone, lan-1 | In-room network switch, lan-3 |
| Cat 6 | In-room network switch, lan-9 | Data outlet 4, behind the displayUplink |
| Cat 6 | Microphone, lan-1 | Data outlet 3, below the table |
| Cat 6 | Touch controller, lan-1 | Data outlet 1, below the table |
| Cat 6A | HDBaseT transmitter, hdbaset-1 | HDBaseT receiver at the display, hdbaset-1Table connection over HDBaseT |
| USB-C | HDBaseT transmitter, usb-c-1 | Laptop |
| HDMI | HDBaseT receiver at the display, hdmi-out-1 | Video codec, hdmi-in-1 |
| Audio | Video codec, audio-out-1 | Amplifier, audio-in-1 |
| Speaker | Amplifier, speaker-out-1 | Loudspeaker, speaker-in-1Speakers are chained from the amplifier; the integrator sets how many |
| Cat 6 | Scheduler panel, lan-1 | Data outlet 1, at the door |
| Power | Display 1, power-in | Power outlet 1, behind the display |
| Power | HDBaseT receiver at each display 1, power-in | Power outlet 2, behind the display |
| Power | HDBaseT transmitter, power-in | Power outlet 1, below the table |
| Cat 6 | Display 2, lan-1 | Data outlet 5, behind the display |
| Power | Display 2, power-in | Power outlet 5, behind the display |
| Power | HDBaseT receiver at each display 2, power-in | Power outlet 6, behind the display |