Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Locations is switched off
Regions, offices, floors and the spaces in them. This demo has the Locations module switched off in Organisation settings.
- 4 to 5People
- 11.14m²
- 1Build option
- 9Spaces built to it
Drawn to scale · 3.05 × 3.66 m, 11.14 m² · 5 seats · Outlets: plain outlets (a space type has no country), 450 mm up to the centre (house default; the space type gives no height); floor boxes with a 300 mm lid · L-shaped sofa, powered table 1.2 × 1.05 m, one guest chair
Outlets
Power for the space's kit is never on a light switch, so nothing turns it off (house assumption).
Wiring
6 signal cables, 7 to outletsList every cable
| Cable | From | To |
|---|---|---|
| HDMI | Video bar, hdmi-out-1 | Display, hdmi-in-1 |
| Cat 6A | Powers the video bar, lan-2 | Video bar, lan-1PoE++ to the video bar |
| Cat 6A | Powers the video bar, lan-1 | Data outlet 2, behind the display |
| Cat 6 | Display, lan-1 | Data outlet 1, behind the display |
| Cat 6 | Touch controller, lan-1 | Data outlet 1, below the table |
| Cat 6A | HDBaseT transmitter, hdbaset-1 | HDBaseT receiver at the display, hdbaset-1Direct cable run 1 |
| USB-C | HDBaseT transmitter, usb-c-1 | Laptop |
| HDMI | HDBaseT receiver at the display, hdmi-out-1 | Video bar, hdmi-in-1 |
| USB | HDBaseT receiver at the display, usb-b-1 | Video bar, usb-c-1Device mode |
| Power | Display, power-in | Power outlet 1, behind the display |
| Power | Powers the video bar, power-in | Power outlet 2, behind the display |
| Power | HDBaseT receiver at the display, power-in | Power outlet 3, behind the display |
| Power | HDBaseT transmitter, power-in | Power outlet 1, below the table |