Vendor access

This part is for Aigna staff

Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.

Go to your installation

Module

Assets is switched off

Device types, units, models, setup guides, standards, IT stores and cables. This demo has the Assets module switched off in Organisation settings.

Organisation settings

SwitchMEL8.17 Comms room (MDF), Rack 1, U19Meraki dashboard · read 06:00Simulated

mel-817-as04

2 ports in use, each on the VLAN the plan gives itchecked just now

2In use
0Parked
48Disabled
0To review

The ports

Cisco Catalyst 9300-48P · 50 ports

1–2–3–4–5–6–7–8–9–10–11–12–13–14–15–16–17–18–19–20–21–22–23–24–25–26–27–28–29–30–31–32–33–34–35–36–37–38–39–40–41–42–43–44–45–46–47–48–

Ports 49 to 50 · uplinks

49T 50T

10 Management
T Trunk: several VLANs, tagged
P Parked: patched, nothing plugged in
– Disabled: nothing patched

Restricted: rack and switch ports Recorded for the demo, as Meraki dashboard would report it. Select a port to open what is plugged into it.

Every port in use

2 in uses, 0 parked, 48 disabled

Port	On it	Mode	VLAN	Plan	Change
Port 49	Switch mel-817-cs01 port 4Uplink	Trunk, tagged 20, 30, 31, 50, 60, 70, 90	Planned VLAN 10 Management	As planned
Port 50	Switch mel-817-cs02 port 4Uplink	Trunk, tagged 20, 30, 31, 50, 60, 70, 90	Planned VLAN 10 Management	As planned

Disabled, nothing patched: 1 to 48.

If this were off

Simulated

What this switch would cut off, worked out from the recorded patching. Press a port to narrow it.

Access switch 4, Level 8 Cisco Catalyst 9300-48P · Rack 1, U19 · 8.17 Comms room (MDF)

Would affect nothing: nothing is patched to it

Off from12:00

Level 8

Would be affected: a projection, not a fault Keeps workingRestricted: floor plan

Its portsPressed ports are off; press one to keep it on and narrow the picture

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748UpUp

Restricted: rack and switch ports "Up" is an uplink: the way this switch reaches the internet.

Spaces it would cut off 0

None: nothing is patched to it.

As recorded

NetBox's names

The switch's record, with every interface's cable trace

id: mel-817-as04
rack: mel-8-17-r1
u: 19
platform: meraki
interfaces:
  - name: 49
    enabled: true
    mode: tagged
    untagged_vlan: 10
    tagged_vlans:
      - 20
      - 30
      - 31
      - 50
      - 60
      - 70
      - 90
    connected:
      cables:
        - mel-cb-19
      device: mel-817-cs01
      interface: 4
  - name: 50
    enabled: true
    mode: tagged
    untagged_vlan: 10
    tagged_vlans:
      - 20
      - 30
      - 31
      - 50
      - 60
      - 70
      - 90
    connected:
      cables:
        - mel-cb-20
      device: mel-817-cs02
      interface: 4
disabled: 1-48

This part is for Aigna staff

Assets is switched off

mel-817-as04

The ports

Change VLAN

What it touches

Every port in use

If this were off

Spaces it would cut off 0

As recorded

View as

Suggested

Delivery

Support and service

The Lab

Leadership

Partners

Overview

Settings

Tell the team