Keia Atlas
Healthy- Space4.14 Copy and print
- ModelCanon imageRUNNER ADVANCE DX C259
- SerialDEMO-CPH-000238
- LifecycleIn service
- Target firmware4.1.0
Healthy when recorded in the space its space type expects; every port wired as the space type says.
Viewing as , ,
Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Assets is switched off
Device types, units, models, setup guides, standards, IT stores and cables. This demo has the Assets module switched off in Organisation settings.
Device typeprinterVersion 1.03 models
Printer
9 units in service · no advisories to review
519 mm × 638 mm × 658 mm, front, to scale
Every spec and portShowing Canon imageRUNNER ADVANCE DX C259
Ports
4 ports, rear and position not stated
- Width
- 519 mm
- Height
- 638 mm
- Depth
- 658 mm
- Weight
- 48 kg
- Power
- 1500 W max
Drawing traced from Canon imageRUNNER ADVANCE DX C259i product photo (three-quarter view, front face drawn), 519 x 638 mm from Canon's specifications. Ports from the vendor's documentation.
Checked on one example, cph-414-prn01 (simulated values).
Asset register
Healthy- Asset tagAG-000238
- SerialDEMO-CPH-000238
- ModelCanon imageRUNNER ADVANCE DX C259
- Space4.14 Copy and print
- StatusActive
- Hostnamecph-414-prn01
Healthy when status is active; space matches where the device is installed.
Addresses and DNS
Healthy- Hostnamecph-414-prn01
- MAC02:BC:F9:86:50:9B
- IP address10.90.4.56
Healthy when address reservation matches the MAC address; forward and reverse DNS records resolve.
Device management
Healthy- Device namecph-414-prn01
- SerialDEMO-CPH-000238
- Firmware4.1.0
Healthy when online in the print management service; firmware at the fleet standard for the model; settings match the setup guide for the model.
Monitoring
Healthy- Monitor namecph-414-prn01
Healthy when reporting; no open critical alerts.
What each field means, and how hostnames and addresses are built: Learn: device fields
Printer·v1.0·19 Oct 2026
imageRUNNER ADVANCE DX C259 Remote UI settings
- ModelimageRUNNER ADVANCE DX C259
- FirmwareNot versioned
- ModeNetworked MFP, Remote UI managed
Checkingon dub-416-prn01
Settings
5 set · 1 verify · 2 per device
New install, in order
- 1Patch into the floor's print VLAN; the printer takes its DHCP reservation.
- 2At the control panel, change the Administrator password from the default before Remote UI login is allowed at all.
- 3Browse to http://<the printer's address>/ and log in as Administrator.
- 4Set the time zone and SNTP server.
Setup guide file state
- AssetboxIn sync
- InfoDNSIn sync
- Fleet LensIn sync
- Monitor DogIn sync
Open the setup guideConfiguring happens in a project's Deploy page.
No firmware line tracked for Canon imageRUNNER ADVANCE DX C259
When the vendor watcher tracks a model, its releases, Aigna's decision on each, and any advisories appear here and on every device of that model.
Symptoms
Likely causes and where to look firstJobs not printingQueue paused; Printer offline; Toner or paper outCheck Device management first
Printer offlineNetwork cable unplugged; Address changed; Powered offCheck Addresses and DNS first
Cross-checks
The same fact must agree everywhere it is recorded| Check | Compares |
|---|---|
| Serial match | keia_atlas.serial = inventory.serial |
| Space match | keia_atlas.space = inventory.space |
| Hostname match | inventory.hostname = dhcp_dns.hostname |
| Firmware match | device_management.firmware_version = keia_atlas.expected_firmware |
Used in
Device type file
- File
- data/device-classes/printer.yaml
- Version
- 1.0
- Updated
- 2026-09-27
- Hostname prefix
- prn