Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Projects is switched off
Projects, the schedule, planning, the work plan and the Lab. This demo has the Projects module switched off in Organisation settings.
Build sheetBatch 1 of 4Project PRJ-20Simulated live
Guildford home office 2 home network gateway
2 values not recorded yet · 7 settings to set, 8 to checkchecked just now
Asset register
Assetbox › Assets- Asset tagAssetbox › Assets
The install recordAG-001457CheckThis unitSeen - Serial numberAssetbox › Assets
The install recordDEMO-REM-001457CheckThis unitSeen - ModelAssetbox › Assets
The space typeUbiquiti UniFi Express 7 (UX7)CheckEvery unitSeen - LocationAssetbox › Assets
The spaceRemote EMEA, Guildford home office 2SetThis unitSeen
Switch port
Network controller › Ports- VLAN (native, untagged)Network controller › Ports
The network standard: VLAN by purpose10 ManagementSetEvery unitNot seen yet - PortNetwork controller › Ports
The port it is patched to (simulated)rem-1-sw01 port 18CheckThis unitNot seen yet
Firmware
UniFi Network app- Firmware versionUniFi Network app
Not recordedNo fleet standard firmware for this model yet. The configuration was checked on 5.1.12.
CheckEvery unitNot checked
Adoption
UniFi Mobile App- Adopt deviceUniFi Mobile App
The setup guide, the same on every unitAdopt into the worker's site from Pending AdoptionSetEvery unitNot read back yet - UI AccountUniFi Mobile App
The setup guide, the same on every unitAn Aigna UI account, not a local-only loginSetEvery unitNot read back yet
Updates
UniFi Network app- Release channel and automatic updatesUniFi Network app › Settings › Control Plane › Updates
The setup guide, the same on every unitOfficial channel, automatic updates offSetEvery unitNot read back yet
UniFi Network
UniFi Network › Site- OrganisationUniFi Network › Organisation
The house valuesAignaCheckEvery unitNot seen yet - SiteUniFi Network › Site
The house values, for Remote EMEARemote EMEASetEvery unitNot seen yet
WAN and LAN
UniFi Network app- WAN portUniFi Network app
The setup guide, the same on every unit10GbE port (factory default WAN); connect the home internet uplink hereCheckEvery unitNot read back yet - LAN networkUniFi Network app
The setup guide: the same instruction on every unitThe worker's own network, DHCP on, over the 2.5GbE portCheckEvery unitNot read back yet
Networks
UniFi Network app- Create Virtual NetworkUniFi Network app › Settings › Networks › Create New Network
Not recordedDecided or measured on site, during setup or commissioning, so it is not recorded before. Note it on the unit afterwards.
SetThis unitNot read back yet
No setting matches these filters.