Keia Atlas

Vendor access

This part is for Aigna staff

Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.

Go to your installation

Module

Locations is switched off

Regions, offices, floors and the spaces in them. This demo has the Locations module switched off in Organisation settings.

Organisation settings

Shared spaceDUBDublin office · Third floorIn service

3.01 Reception

All 7 units in service · no open incidentschecked just now

Plate C: Wall plate outside the door, behind the booking panel. 1 data port. Data 1: Door controller for the office entrance (badge readers and the door release)9. Video intercom and remote door release · Set per project7. Door controller for the office entrance (badge readers and the door release) · outside the door2. Signage player, BrightSign XT1145 · Behind the displayPlate A: Wall plate behind the display. 4 Type G sockets, 3 data ports. Power 1: Display Power 2: signage player Power 3: spare Power 4: HDBaseT receiver at the display Data 1: Display Data 2: Signage player Data 3: spare3. Wall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT, Kramer WP-20CT · Set per project10. Panic button at the desk · Set per projectPlate A: Wall plate behind the display. 4 Type G sockets, 3 data ports. Power 1: Display Power 2: signage player Power 3: spare Power 4: HDBaseT receiver at the display Data 1: Display Data 2: Signage player Data 3: sparePlate B: Wall plate on the wall, where the project puts it. 1 Type G socket, 1 data port. Power 1: Wall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT Data 1: wall plate for a laptop (optional)Plate B: Wall plate on the wall, where the project puts it. 1 Type G socket, 1 data port. Power 1: Wall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT Data 1: wall plate for a laptop (optional)Plate A: Wall plate behind the display. 4 Type G sockets, 3 data ports. Power 1: Display Power 2: signage player Power 3: spare Power 4: HDBaseT receiver at the display Data 1: Display Data 2: Signage player Data 3: spare4. HDBaseT receiver at the display, Kramer TP-580Rxr · Behind the display1. Display (65 in shown) · Display wall6. CCTV camera · CeilingReception deskReception deskPlate D: Ceiling plate in the ceiling. 2 data ports. Data 1: CCTV camera Data 2: Temperature, humidity and CO2 sensor for the building management system5. Visitor sign-in system · Set per project5. Visitor sign-in system · Set per projectLounge sofaCoffee table8. Temperature, humidity and CO2 sensor for the building management system · CeilingPlantPlantPlantTrack behind the displaySkirting trunkingWall riser, up to the trackCeiling basketCeiling basketCeiling basketCeiling basketPlate A: cabled up inside the wall to the ceiling above the door, back to the comms roomPlate B: cabled up inside the wall to the ceiling above the door, back to the comms roomPlate D: cabled up inside the wall to the ceiling above the door, back to the comms roomHDMI: Signage player HDMI out to Display HDMI in, via the track behind the displayCat 6A: Wall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT HDBaseT to HDBaseT receiver at the display HDBaseT, via the skirting trunking, the wall riser and the track behind the displayCat 6: Display LAN to plate A, data 1, via the track behind the displayCat 6: Signage player LAN to plate A, data 2, via the track behind the displayPower: Display power to plate A, power 1, via the track behind the displayPower: HDBaseT receiver at the display power to plate A, power 4, via the track behind the displayPower: Wall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT power to plate B, power 1, plugged in beside itCat 6: CCTV camera LAN to plate D, data 1, via the ceilingCat 6: Temperature LAN to plate D, data 2, via the ceilingCat 6: Door controller for the office entrance (badge readers and the door release) LAN to plate C, data 1, plugged in beside itWhere the data comes in: above the door, from Comms room (MDF) 3.216. CCTV camera61. Display19. Video intercom and remote door release98. Temperature, humidity and CO2 sensor for the building management system85. Visitor sign-in system53. Wall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT3Plate B: Wall plate on the wall, where the project puts it. 1 Type G socket, 1 data port. Power 1: Wall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT Data 1: wall plate for a laptop (optional)B2. Signage player, behind the display27. Door controller for the office entrance (badge readers and the door release), at the door74. HDBaseT receiver at the display, behind the display410. Panic button at the desk, set per project10Plate D: Ceiling plate in the ceiling. 2 data ports. Data 1: CCTV camera Data 2: Temperature, humidity and CO2 sensor for the building management systemDPlate C: Wall plate outside the door, behind the booking panel. 1 data port. Data 1: Door controller for the office entrance (badge readers and the door release)CPlate A: Wall plate behind the display. 4 Type G sockets, 3 data ports. Power 1: Display Power 2: signage player Power 3: spare Power 4: HDBaseT receiver at the display Data 1: Display Data 2: Signage player Data 3: spareA

Drawn to scale · 6.00 × 5.00 m, 30 m² · 4 seats · Outlets: Type G sockets; UK and Ireland plates, 86 and 146 mm wide, 450 mm up to the centre (house default; the space type gives no height) · Space size varies by office; 6 × 5 m shown · Desk for one or two, lounge seating, signage 65 in shown

Incidents

No incidents recorded for this space.

All incidents at Dublin office

Compared against

Reception

Standard, with the door and building systems wired: The standard reception, with its door controller, CCTV camera and an environment sensor each on a data outlet, so they sit on the Security and Building VLANs.

Required devices
All recorded
Optional fitted
2 of 3
Wiring
Checks pass

Fitted: Wall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT, HDBaseT receiver at the display.

Lifecycle

In service
7

Cable tests

Restricted: rack and switch ports

All 7 links passed certification · closest margin 3.3 dB · last tested 13 Oct 2026

LinkOutletCableLengthResultMarginTested
DUB-3.21-R1-U06-P01Behind the display, 1Cat6A27 mPass6.18 dB14 Feb 2022
DUB-3.21-R1-U06-P02Behind the display, 2Cat6A27.22 mPass3.34 dB14 Feb 2022
DUB-3.21-R1-U06-P03Behind the display, 3Cat6A27.39 mPass4.63 dB14 Feb 2022
DUB-3.21-R1-U06-P04Set per project, 1Cat6A28.33 mPass5.51 dB14 Feb 2022
DUB-3.21-R1-U06-P41Ceiling, 1Cat6A19.54 mPass5.12 dB13 Oct 2026
DUB-3.21-R1-U06-P42At the door, 1Cat6A23.74 mPass4.86 dB13 Oct 2026
DUB-3.21-R1-U06-P43Ceiling, 2Cat6A19.54 mPass5.41 dB13 Oct 2026

From the cabling contractor's certification report, recorded on each run (made up for the demo). A margin under 3 dB passes but is worth a look.

Upkeep

Licences from the licence portals

1 licence, each with a seat for this space

  • BSN.cloudDevice management · renews 7 Mar 2027 (in 139 days)

Outlets

For this space
ServiceWhereHow manyServesProvided by
PowerBehind the display4display, signage player, spare, spareIT
DataBehind the display3display, signage player, spareIT
DataSet per project1wall plate for a laptop (optional)Terminated as a plug so the installer can test itIT
PowerSet per project1wall plate (optional)The wall plate draws 5 V DC at 390 mAIT
DataCeiling2CCTV camera, environment sensorIT
DataAt the door1door controllerIT

Wiring

3 signal cables, 8 to outlets
VideoHDBaseTUSB

Includes the optional kit fitted here.

Where it startsCarried, switched and processedWhere it endsHDMI: Signage player, hdmi-out-1 to Display, hdmi-in-1Cat 6A: Wall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT, hdbaset-1 to HDBaseT receiver at the display, hdbaset-1USB-C: Wall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT, usb-c-1 to LaptopSignage player, BrightSign XT1145Signage playerBrightSign XT1145hdmi-out-1 · HDMINetwork, behind the display #2Network, behind the display #2Display, Model set per projectDisplayModel set per projecthdmi-in-1Network, behind the display #1Network, behind the display #1Power, behind the display #1Power, behind the display #1Wall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT, Kramer WP-20CTWall plate where alaptop plugs in (HDMI…Kramer WP-20CTusb-c-1 · USB-Chdbaset-1 · RJ45Power, set per project #1Power, set per project #1HDBaseT receiver at the display, Kramer TP-580RxrHDBaseT receiver atthe displayKramer TP-580Rxrhdbaset-1 · RJ45Power, behind the display #4Power, behind the display #4Laptop, The person's ownLaptopThe person's owncableCCTV camera, Model set per projectCCTV cameraModel set per projectNetwork, ceiling #1Network, ceiling #1Temperature, humidity and CO2 sensor for the building management system, Model set per projectTemperature, humidityand CO2 sensor for th…Model set per projectNetwork, ceiling #2Network, ceiling #2Door controller for the office entrance (badge readers and the door release), Model set per projectDoor controller forthe office entrance…Model set per projectNetwork, at the door #1Network, at the door #1
List every cable
CableFromTo
HDMISignage player, hdmi-out-1Display, hdmi-in-1
Cat 6AWall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT, hdbaset-1HDBaseT receiver at the display, hdbaset-1
USB-CWall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT, usb-c-1Laptop
Cat 6Display, lan-1Data outlet 1, behind the display
Cat 6Signage player, lan-1Data outlet 2, behind the displayPoE+ powers the player
PowerDisplay, power-inPower outlet 1, behind the display
PowerHDBaseT receiver at the display, power-inPower outlet 4, behind the display
PowerWall plate where a laptop plugs in (HDMI or USB-C); sends to the display over HDBaseT, power-inPower outlet 1, set per project
Cat 6CCTV camera, lan-1Data outlet 1, ceilingPoE powers the camera
Cat 6Temperature, humidity and CO2 sensor for the building management system, lan-1Data outlet 2, ceilingPoE powers the sensor
Cat 6Door controller for the office entrance (badge readers and the door release), lan-1Data outlet 1, at the doorPoE powers the controller and its readers

View as

See Keia Atlas the way someone else does. A demo: nobody signs in.

Viewing asAnna ByrneAV and IT delivery engineer · EMEA

Suggested

Delivery

  • Delivery engineerDesigns and commissions spaces, from survey to handover
  • Project managerRuns projects day to day: dates, suppliers and who does what
  • On-site technicianInstalls and fixes kit in the offices
  • Programme managerPlans the year of projects across every region
  • Engineering managerLeads the delivery engineers
  • Project management leadLeads the project managers
  • On-site services managerLeads the on-site technicians
  • Delivery managerThe whole delivery team, every region

Support and service

  • Service desk analystTakes incidents as they arrive and routes them
  • Network engineerPorts, VLANs and patching
  • Service manager, AVOwns the AV standard and its service
  • Service manager, networkOwns the network standard and its service

The Lab

  • Innovation engineerTests new kit before it ships

Leadership

  • Head of AV and ITThe whole service, every region

Partners

  • Integration vendorSees their own installations only
  • Service vendorRepairs under the service contract

Overview

  • EveryoneEvery role's first screen at once, to see the whole picture

Settings

Appearance
LookStudio
Text size
Default

Report

Tell the team

About 3.01 Reception, Dublin office

Goes to Sofia Reyes, Service manager, AV. Reviewed within five working days.