Keia Atlas

Vendor access

This part is for Aigna staff

Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.

Go to your installation

Module

Locations is switched off

Regions, offices, floors and the spaces in them. This demo has the Locations module switched off in Organisation settings.

Organisation settings

Meeting roomDUBDublin office · Third floorIn service

3.10 Oystercatcher

All 6 units in service · no open incidentschecked just now

Plate A: Wall plate behind display 1. 4 Type G sockets, 2 data ports. Power 1: Main display Power 2: HDBaseT receiver at the display Power 3: spare Power 4: spare Data 1: Main display Data 2: Video bar6. HDBaseT receiver at the display, Kramer EXT3-POE-XR-R · Behind the displayPlate A: Wall plate behind display 1. 4 Type G sockets, 2 data ports. Power 1: Main display Power 2: HDBaseT receiver at the display Power 3: spare Power 4: spare Data 1: Main display Data 2: Video barPlate A: Wall plate behind display 1. 4 Type G sockets, 2 data ports. Power 1: Main display Power 2: HDBaseT receiver at the display Power 3: spare Power 4: spare Data 1: Main display Data 2: Video bar1. Main display (65 in shown) · Display wall3. Video bar, Poly Studio X52 · Display wallMarker boardPlate B: Wall plate behind display 2. 4 Type G sockets, 2 data ports. Power 5: Second display Power 6: Video bar Power 7: spare Power 8: spare Data 3: Second display Data 4: sparePlate B: Wall plate behind display 2. 4 Type G sockets, 2 data ports. Power 5: Second display Power 6: Video bar Power 7: spare Power 8: spare Data 3: Second display Data 4: sparePlate B: Wall plate behind display 2. 4 Type G sockets, 2 data ports. Power 5: Second display Power 6: Video bar Power 7: spare Power 8: spare Data 3: Second display Data 4: spare2. Second display (43 in shown) · Display wallPlate E: Wall plate outside the door, behind the booking panel. 1 data port. Data 1: scheduler panel (optional)Plate C: Floor box in the floor under the table. 2 Type G sockets, 2 data ports, 5 direct runs. Power 1: HDBaseT transmitter Power 2: spare Data 1: Touch controller Data 2: spare Direct run 1: HDBaseT link to the display wall Direct run 2: extra microphone (optional) Direct run 3: spare Direct run 4: spare Direct run 5: spare5. HDBaseT transmitter, Kramer EXT3-C-XR-T · Below the tablePlate D: Floor box in the floor by the table. 2 Type G sockets. Power 1: spare Power 2: spare4. Touch controller, Poly TC10 · On the desk4. Touch controller, Poly TC10 · On the deskTrack behind the displayTray under the tableUp the table legFloor cable coverFloor cable coverFloor boxFloor boxFloor duct, in the floorFloor duct, in the floorWall riser, up to the trackPlate A: cabled up inside the wall to the ceiling above the door, back to the comms roomPlate B: cabled up inside the wall to the ceiling above the door, back to the comms roomPlate C: cabled through the floor void to the ceiling above the door, back to the comms roomPlate D: cabled through the floor void to the ceiling above the door, back to the comms roomHDMI: Video bar HDMI out 1 to Main display HDMI in, via the track behind the displayHDMI: Video bar HDMI out 2 to Second display HDMI in, via the track behind the displayCat 6: Main display LAN to plate A, data 1, via the track behind the displayCat 6: Video bar LAN to plate A, data 2, via the track behind the displayCat 6: Touch controller LAN to plate C, data 1, via the table tray, the table leg, the floor cable cover and floor box CCat 6A: HDBaseT transmitter HDBaseT to HDBaseT receiver at the display HDBaseT, via the table tray, the table leg, the floor cable cover, floor box C, the floor duct, the wall riser and the track behind the displayUSB-C: HDBaseT transmitter USB-C to a laptop, via the table trayHDMI: HDBaseT receiver at the display HDMI out to Video bar HDMI in, via the track behind the displayUSB: HDBaseT receiver at the display USB-B to Video bar USB-C, via the track behind the displayPower: Main display power to plate A, power 1, via the track behind the displayPower: HDBaseT receiver at the display power to plate A, power 2, via the track behind the displayPower: HDBaseT transmitter power to plate C, power 1, via the table tray, the table leg, the floor cable cover and floor box CCat 6: Second display LAN to plate B, data 3, via the track behind the displayPower: Second display power to plate B, power 5, via the track behind the displayPower: Video bar power to plate B, power 6, via the track behind the displayWhere the data comes in: above the door, from Comms room (MDF) 3.211. Main display13. Video bar32. Second display24. Touch controller4Plate D: Floor box in the floor by the table. 2 Type G sockets. Power 1: spare Power 2: spareD6. HDBaseT receiver at the display, behind the display65. HDBaseT transmitter, below the table5Plate A: Wall plate behind display 1. 4 Type G sockets, 2 data ports. Power 1: Main display Power 2: HDBaseT receiver at the display Power 3: spare Power 4: spare Data 1: Main display Data 2: Video barAPlate B: Wall plate behind display 2. 4 Type G sockets, 2 data ports. Power 5: Second display Power 6: Video bar Power 7: spare Power 8: spare Data 3: Second display Data 4: spareBPlate E: Wall plate outside the door, behind the booking panel. 1 data port. Data 1: scheduler panel (optional)EPlate C: Floor box in the floor under the table. 2 Type G sockets, 2 data ports, 5 direct runs. Power 1: HDBaseT transmitter Power 2: spare Data 1: Touch controller Data 2: spare Direct run 1: HDBaseT link to the display wall Direct run 2: extra microphone (optional) Direct run 3: spare Direct run 4: spare Direct run 5: spareC

Drawn to scale · 5.50 × 4.22 m, 23.2 m² · 7 seats · Outlets: Type G sockets; UK and Ireland plates, 86 and 146 mm wide; floor boxes with a 300 mm lid · Bar-height table, top 39.5 in, 56 in from the display wall; 7 stools

Incidents

No incidents recorded for this space.

All incidents at Dublin office

Compared against

Makerspace

Standard: A 65 inch and a 43 inch display with a Poly Studio X52 and a table connection over HDBaseT.

Required devices
All recorded
Optional fitted
None of 5
Wiring
Checks pass

Lifecycle

In service
6

Meeting platforms

The video bar is certified for Google Meet, Microsoft Teams Rooms and Poly Video Mode (SIP and H.323)

  • Poly Studio X52Video barGoogle MeetMicrosoft Teams RoomsPoly Video Mode (SIP and H.323)
  • Poly TC10Touch controllerGoogle MeetMicrosoft Teams Rooms

Accessibility

Live captions and step-free access

Hearing loop
None in this room
Live captions
On in calls, from the touch panel
Step-free access
Yes
Last walked through
9 Jul 2026, by facilities, Dublin office, with the local AV technician

From the office's accessibility record (demo), the same one the room guide reads to people in the room.

Cable tests

Restricted: rack and switch ports

All 7 links passed certification · closest margin 2.6 dB · last tested 14 Feb 2022

LinkOutletCableLengthResultMarginTested
DUB-3.21-R1-U09-P29Behind the display, 1Cat6A33.01 mPass3.39 dB14 Feb 2022
DUB-3.21-R1-U09-P30Behind the display, 2Cat6A32.98 mPass4.76 dB14 Feb 2022
DUB-3.21-R1-U09-P31Behind the display, 3Cat6A31.32 mPass5.58 dB14 Feb 2022
DUB-3.21-R1-U09-P32Behind the display, 4Cat6A31.58 mPass5.36 dB14 Feb 2022
DUB-3.21-R1-U09-P33Below the table, 1Cat6A30.7 mPass2.63 dB14 Feb 2022
DUB-3.21-R1-U09-P34Below the table, 2Cat6A30.54 mPass6.18 dB14 Feb 2022
DUB-3.21-R1-U09-P35At the door, 1Cat6A29.75 mPass5.25 dB14 Feb 2022

From the cabling contractor's certification report, recorded on each run (made up for the demo). A margin under 3 dB passes but is worth a look.

Upkeep

Licences from the licence portals

Its pool is short of seats

  • Google Meet hardwareEMEA · renews 22 Mar 2027 (in 154 days)5 seats short across the pool
  • Poly LensDevice management · renews 21 Jul 2027 (in 275 days)

Meeting quality from the meeting platform

92 out of 100 in the last 7 days

  • Nine weeks 9 weeks: lowest 89, highest 94, latest 92
  • 1 of 32 calls poorMostly the pictureFrom Google Meet
Every space's calls

Room guide and QR

What people in the space see

The code on the table opens this space's guide: how to start a meeting and share a screen, and a two-tap way to report a problem or ask for something.

Open the guidePrint the table card

Sent from the guide

    Nothing sent from this space's guide yet. Reports appear here, on the Incidents board and on Home as they arrive.

    Outlets

    For this space
    ServiceWhereHow manyServesProvided by
    PowerBehind the display8display 1, HDBaseT receiver, spare, spare, display 2, video bar, spare, spareThe optional whiteboard kit uses three of the spares.IT
    PowerBelow the table2HDBaseT transmitter, spareIT
    PowerFloor box2For people at the table. A recommendation; facilities decide. Placed under a table leg.Facilities
    DataBehind the display4display 1, video bar, display 2, spareIT
    DataBelow the table2touch controller, spareIT
    Direct cable runBelow the table3HDBaseT link to the display wall, extra microphone (optional), spareIT
    Direct cable runBelow the table2spare, spareIT
    DataAt the door1scheduler panel (optional)IT

    Wiring

    6 signal cables, 9 to outlets
    VideoHDBaseTUSB
    Where it startsCarried, switched and processedWhere it endsHDMI: Video bar, hdmi-out-1 to Main display, hdmi-in-1HDMI: Video bar, hdmi-out-2 to Second display, hdmi-in-1Cat 6A: HDBaseT transmitter, hdbaset-1 to HDBaseT receiver at the display, hdbaset-1USB-C: HDBaseT transmitter, usb-c-1 to LaptopHDMI: HDBaseT receiver at the display, hdmi-out-1 to Video bar, hdmi-in-1USB: HDBaseT receiver at the display, usb-b-1 to Video bar, usb-c-1Video bar, Poly Studio X52Video barPoly Studio X52hdmi-in-1 · HDMIusb-c-1 · USB-Chdmi-out-1 · HDMIhdmi-out-2 · HDMINetwork, behind the display #2Network, behind the di…Power, behind the display #6Power, behind the disp…Main display, Model set per projectMain displayModel set per projecthdmi-in-1Network, behind the display #1Network, behind the di…Power, behind the display #1Power, behind the disp…Second display, Model set per projectSecond displayModel set per projecthdmi-in-1Network, behind the display #3Network, behind the di…Power, behind the display #5Power, behind the disp…Touch controller, Poly TC10Touch controllerPoly TC10Network, under the table #1Network, under the tab…HDBaseT transmitter, Kramer EXT3-C-XR-THDBaseTtransmitterKramer EXT3-C-XR-Tusb-c-1 · USB-Chdbaset-1 · RJ45Power, under the table #1Power, under the table…HDBaseT receiver at the display, Kramer EXT3-POE-XR-RHDBaseT receiverat the displayKramer EXT3-POE-XR-Rhdbaset-1 · RJ45hdmi-out-1 · HDMIusb-b-1 · USB-BPower, behind the display #2Power, behind the disp…Laptop, The person's ownLaptopThe person's owncable
    List every cable
    CableFromTo
    HDMIVideo bar, hdmi-out-1Main display, hdmi-in-1
    HDMIVideo bar, hdmi-out-2Second display, hdmi-in-1
    Cat 6Main display, lan-1Data outlet 1, behind the display
    Cat 6Video bar, lan-1Data outlet 2, behind the display
    Cat 6Touch controller, lan-1Data outlet 1, below the table
    Cat 6AHDBaseT transmitter, hdbaset-1HDBaseT receiver at the display, hdbaset-1In direct cable run 1, floor box to display wall. The receiver powers the transmitter over this cable.
    USB-CHDBaseT transmitter, usb-c-1LaptopThe table cable people plug their laptop into
    HDMIHDBaseT receiver at the display, hdmi-out-1Video bar, hdmi-in-1
    USBHDBaseT receiver at the display, usb-b-1Video bar, usb-c-1Laptop USB through to the video bar, for device mode
    PowerMain display, power-inPower outlet 1, behind the display
    PowerHDBaseT receiver at the display, power-inPower outlet 2, behind the display
    PowerHDBaseT transmitter, power-inPower outlet 1, below the tableOptional: the transmitter can also run on power from the receiver
    Cat 6Second display, lan-1Data outlet 3, behind the display
    PowerSecond display, power-inPower outlet 5, behind the display
    PowerVideo bar, power-inPower outlet 6, behind the display

    View as

    See Keia Atlas the way someone else does. A demo: nobody signs in.

    Viewing asAnna ByrneAV and IT delivery engineer · EMEA

    Suggested

    Delivery

    • Delivery engineerDesigns and commissions spaces, from survey to handover
    • Project managerRuns projects day to day: dates, suppliers and who does what
    • On-site technicianInstalls and fixes kit in the offices
    • Programme managerPlans the year of projects across every region
    • Engineering managerLeads the delivery engineers
    • Project management leadLeads the project managers
    • On-site services managerLeads the on-site technicians
    • Delivery managerThe whole delivery team, every region

    Support and service

    • Service desk analystTakes incidents as they arrive and routes them
    • Network engineerPorts, VLANs and patching
    • Service manager, AVOwns the AV standard and its service
    • Service manager, networkOwns the network standard and its service

    The Lab

    • Innovation engineerTests new kit before it ships

    Leadership

    • Head of AV and ITThe whole service, every region

    Partners

    • Integration vendorSees their own installations only
    • Service vendorRepairs under the service contract

    Overview

    • EveryoneEvery role's first screen at once, to see the whole picture

    Settings

    Appearance
    LookStudio
    Text size
    Default

    Report

    Tell the team

    About 3.10 Oystercatcher, Dublin office

    Goes to Sofia Reyes, Service manager, AV. Reviewed within five working days.