Keia Atlas
Healthy- Space12.01 Reception
- ModelBrightSign XT1145
- SerialDEMO-CHI-000002
- LifecycleIn service
- Target firmware4.0.1
Healthy when recorded in the space its space type expects; every port wired as the space type says.
Viewing as , ,
Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Assets is switched off
Device types, units, models, setup guides, standards, IT stores and cables. This demo has the Assets module switched off in Organisation settings.
Device typesignage-playerVersion 1.02 models
Signage player
18 units in service · no advisories to review
238.6 mm × 19.2 mm × 185.9 mm, front, to scale
Every spec and portShowing BrightSign XT1145
Ports
10 ports, rear and front
- Width
- 238.6 mm
- Height
- 19.2 mm
- Depth
- 185.9 mm
- Weight
- 0.68 kg
Drawing traced from BrightSign XT5 series product render, connector edge (positions read off the render). Ports from the vendor's documentation.
Checked on one example, chi-1201-sig01 (simulated values).
Asset register
Healthy- Asset tagAG-000002
- SerialDEMO-CHI-000002
- ModelBrightSign XT1145
- Space12.01 Reception
- StatusActive
- Hostnamechi-1201-sig01
Healthy when status is active; space matches where the device is installed.
Addresses and DNS
Healthy- Hostnamechi-1201-sig01
- MAC02:AE:A6:44:16:6A
- IP address10.40.12.90
Healthy when address reservation matches the MAC address; forward and reverse DNS records resolve.
Device management
Healthy- Device namechi-1201-sig01
- SerialDEMO-CHI-000002
- Firmware4.0.1
Healthy when online in the vendor's content and device management service; firmware at the fleet standard for the model; settings match the setup guide for the model.
Monitoring
Healthy- Monitor namechi-1201-sig01
Healthy when reporting; no open critical alerts.
What each field means, and how hostnames and addresses are built: Learn: device fields
Signage player·v1.0·19 Oct 2026
XT1145 signage player, BSN.cloud managed
- ModelXT1145
- Firmware9.1.151
- ModeSignage cloud
Checkingon dub-301-sig01
Settings
5 set · 4 verify · 3 per device
New install, in order
- 1Patch into the space's PoE+ AV port; the player takes its reserved address.
- 2Enable the Local DWS in BrightAuthor:Connected and set its password before the player leaves the bench.
- 3Register the player's serial number in BSN.cloud and assign it to the space's device group.
- 4Set the Network tab's time zone, DHCP and 802.1x settings, or let the group's setup file apply them.
Setup guide file state
- AssetboxIn sync
- InfoDNSIn sync
- DarkSignIn sync
- AppStateIn sync
- Monitor DogIn sync
Open the setup guideConfiguring happens in a project's Deploy page.
No firmware line tracked for BrightSign XT1145
When the vendor watcher tracks a model, its releases, Aigna's decision on each, and any advisories appear here and on every device of that model.
Symptoms
Likely causes and where to look firstDisplay shows nothingPlayer without PoE; HDMI cable or display input; No content scheduledCheck Device management first
Player offlinePoE port off; Network cable unplugged; Address changedCheck Addresses and DNS first
Cross-checks
The same fact must agree everywhere it is recorded| Check | Compares |
|---|---|
| Serial match | keia_atlas.serial = inventory.serial |
| Space match | keia_atlas.space = inventory.space |
| Hostname match | inventory.hostname = dhcp_dns.hostname |
| Firmware match | device_management.firmware_version = keia_atlas.expected_firmware |
Device type file
- File
- data/device-classes/signage-player.yaml
- Version
- 1.0
- Updated
- 2026-09-27
- Hostname prefix
- sig