Keia Atlas
Healthy- Space12.01 Reception
- ModelBrightSign XT1145
- SerialDEMO-CHI-000002
- LifecycleIn service
- Target firmware4.0.1
Healthy when recorded in the space its space type expects; every port wired as the space type says.
Viewing as , ,
Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Assets is switched off
Device types, units, models, setup guides, standards, IT stores and cables. This demo has the Assets module switched off in Organisation settings.
Device typesignage-playerVersion 1.02 models
Signage player
0 units in service · no advisories to review
Size not published, front, to scale
Every spec and portShowing Lumen SP-100 Signage Player
Ports
4 ports, rear
Drawing traced from Illustrative drawing of a fictional model (house design). Ports from the vendor's documentation.
Checked on one example, chi-1201-sig01 (simulated values).
Asset register
Healthy- Asset tagAG-000002
- SerialDEMO-CHI-000002
- ModelBrightSign XT1145
- Space12.01 Reception
- StatusActive
- Hostnamechi-1201-sig01
Healthy when status is active; space matches where the device is installed.
Addresses and DNS
Healthy- Hostnamechi-1201-sig01
- MAC02:AE:A6:44:16:6A
- IP address10.40.12.90
Healthy when address reservation matches the MAC address; forward and reverse DNS records resolve.
Device management
Healthy- Device namechi-1201-sig01
- SerialDEMO-CHI-000002
- Firmware4.0.1
Healthy when online in the vendor's content and device management service; firmware at the fleet standard for the model; settings match the setup guide for the model.
Monitoring
Healthy- Monitor namechi-1201-sig01
Healthy when reporting; no open critical alerts.
What each field means, and how hostnames and addresses are built: Learn: device fields
Nothing to configure on Lumen SP-100 Signage Player
It works as it comes, or it is set up through the device it connects to. See every setup guide.
No firmware line tracked for Lumen SP-100 Signage Player
When the vendor watcher tracks a model, its releases, Aigna's decision on each, and any advisories appear here and on every device of that model.
Symptoms
Likely causes and where to look firstDisplay shows nothingPlayer without PoE; HDMI cable or display input; No content scheduledCheck Device management first
Player offlinePoE port off; Network cable unplugged; Address changedCheck Addresses and DNS first
Cross-checks
The same fact must agree everywhere it is recorded| Check | Compares |
|---|---|
| Serial match | keia_atlas.serial = inventory.serial |
| Space match | keia_atlas.space = inventory.space |
| Hostname match | inventory.hostname = dhcp_dns.hostname |
| Firmware match | device_management.firmware_version = keia_atlas.expected_firmware |
Device type file
- File
- data/device-classes/signage-player.yaml
- Version
- 1.0
- Updated
- 2026-09-27
- Hostname prefix
- sig