Keia Atlas
Healthy- SpaceAurora home office 1
- ModelUbiquiti UniFi Express 7 (UX7)
- SerialDEMO-RAM-001480
- LifecycleIn service
- Target firmware5.4.1
Healthy when recorded in the space its space type expects; every port wired as the space type says.
Viewing as , ,
Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Assets is switched off
Device types, units, models, setup guides, standards, IT stores and cables. This demo has the Assets module switched off in Organisation settings.
Device typenetwork-gatewayVersion 1.02 models
Home network gateway
100 units in service · no advisories to review
117 mm × 42.5 mm × 117 mm, front, to scale
Every spec and portShowing Ubiquiti UniFi Express 7 (UX7)
Ports
3 ports, position not stated
- Width
- 117 mm
- Height
- 42.5 mm
- Depth
- 117 mm
- Weight
- 0.443 kg
- Power
- 22 W max
Drawing traced from Ubiquiti UniFi Express 7 store photos (front). Ports from the vendor's documentation.
Checked on one example, ram-aurora-01-dev01 (simulated values).
Asset register
Healthy- Asset tagAG-001480
- SerialDEMO-RAM-001480
- ModelUbiquiti UniFi Express 7 (UX7)
- SpaceAurora home office 1
- StatusActive
Healthy when status is active; space matches where the device is installed.
Device management
Healthy- Device nameram-aurora-01-dev01
- SerialDEMO-RAM-001480
- Firmware5.4.1
Healthy when online in the vendor's cloud management service; firmware at the fleet standard for the model; settings match the setup guide for the model.
What each field means, and how hostnames and addresses are built: Learn: device fields
Home network gateway·v1.0·19 Oct 2026
UniFi Express 7 remote worker gateway
- ModelUniFi Express 7
- Firmware5.1.12
- ModeRemote/home worker gateway
Checkingon AG-001480
Settings
4 set · 2 verify · 2 per device
New install, in order
- 1Connect the 10GbE port to the home internet router or ONT (the default WAN port); power over the included USB-C adapter.
- 2Adopt the gateway into the site's console from the UniFi Mobile App over WiFi or Bluetooth.
- 3Sign the adoption in with an Aigna UI account, not a local-only login.
- 4Create the worker's own network (VLAN) and confirm DHCP is serving the 2.5GbE LAN port.
Setup guide file state
- AssetboxIn sync
- Fleet LensIn sync
Open the setup guideConfiguring happens in a project's Deploy page.
No firmware line tracked for Ubiquiti UniFi Express 7 (UX7)
When the vendor watcher tracks a model, its releases, Aigna's decision on each, and any advisories appear here and on every device of that model.
Symptoms
Likely causes and where to look firstNo internetHome broadband down; Gateway offline; WAN cable unpluggedCheck Device management first
Cross-checks
The same fact must agree everywhere it is recorded| Check | Compares |
|---|---|
| Serial match | keia_atlas.serial = inventory.serial |
| Space match | keia_atlas.space = inventory.space |
| Firmware match | device_management.firmware_version = keia_atlas.expected_firmware |
Device type file
- File
- data/device-classes/network-gateway.yaml
- Version
- 1.0
- Updated
- 2026-09-27
- Hostname prefix