Keia Atlas
Healthy- Space3.03 Heron
- ModelKramer PA-240Z
- SerialDEMO-DUB-000286
- LifecycleIn service
Healthy when recorded in the space its space type expects; every port wired as the space type says.
Viewing as , ,
Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Assets is switched off
Device types, units, models, setup guides, standards, IT stores and cables. This demo has the Assets module switched off in Organisation settings.
Device typeamplifierVersion 1.02 models
Amplifier
5 units in service · no advisories to review
214.6 mm × 43.6 mm × 163 mm, front, to scale
Every spec and portShowing Kramer PA-240Z
Ports
7 ports, rear
- Width
- 214.6 mm
- Height
- 43.6 mm
- Depth
- 163 mm
- Weight
- 0.9 kg
Drawing traced from Kramer PA-240Z product photo (front panel). Ports from the vendor's documentation.
Checked on one example, dub-303-amp01 (simulated values).
Asset register
Healthy- Asset tagAG-000286
- SerialDEMO-DUB-000286
- ModelKramer PA-240Z
- Space3.03 Heron
- StatusActive
- Hostnamedub-303-amp01
Healthy when status is active; space matches where the device is installed.
Addresses and DNS
Healthy- Hostnamedub-303-amp01
- MAC02:3F:89:DF:BA:93
- IP address10.20.3.59
Healthy when address reservation matches the MAC address; forward and reverse DNS records resolve.
What each field means, and how hostnames and addresses are built: Learn: device fields
Amplifier·v1.0·19 Oct 2026
PA-240Z ceiling speaker amplifier
- ModelPA-240Z
- FirmwareNot versioned
- ModeStand-alone
Checkingon dub-303-amp01
Settings
3 set · 6 verify · 2 per device
New install, in order
- 1Rack-mount PA-240Z and wire the ceiling speakers to the Hi-Z OUT terminal block.
- 2Set DIP-switch 1 to Hi-Z and DIP-switch 2 to 70V or 100V before applying power.
- 3Set the rear-panel master volume trimmer to a safe starting level.
- 4Connect Ethernet, browse to the web pages, and change the default Admin/Admin login.
Setup guide file state
- AssetboxIn sync
- InfoDNSIn sync
Open the setup guideConfiguring happens in a project's Deploy page.
No firmware line tracked for Kramer PA-240Z
When the vendor watcher tracks a model, its releases, Aigna's decision on each, and any advisories appear here and on every device of that model.
Symptoms
Likely causes and where to look firstNo room audioAmplifier off; Speaker cable fault; Wrong audio output on the codecCheck Keia Atlas first
Cross-checks
The same fact must agree everywhere it is recorded| Check | Compares |
|---|---|
| Serial match | keia_atlas.serial = inventory.serial |
| Space match | keia_atlas.space = inventory.space |
| Hostname match | inventory.hostname = dhcp_dns.hostname |
Device type file
- File
- data/device-classes/amplifier.yaml
- Version
- 1.0
- Updated
- 2026-09-27
- Hostname prefix