Keia Atlas
Healthy- Space12.03 Heron
- ModelLogitech Scribe
- SerialDEMO-CHI-000010
- LifecycleIn service
- Target firmware5.4.0
Healthy when recorded in the space its space type expects; every port wired as the space type says.
Viewing as , ,
Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Assets is switched off
Device types, units, models, setup guides, standards, IT stores and cables. This demo has the Assets module switched off in Organisation settings.
Device typecameraVersion 1.05 models
Camera
12 units in service · no advisories to review
119 mm × 149 mm × 593 mm, outline for its kind
Every spec and portShowing Logitech Scribe
Ports
1 port, rear
- Width
- 119 mm
- Height
- 149 mm
- Depth
- 593 mm
- Weight
- 1.1 kg
No traced drawing yet, so it is shown as the outline for its kind. Ports from the vendor's documentation.
Checked on one example, chi-12-03-dev01 (simulated values).
Asset register
Healthy- Asset tagAG-000010
- SerialDEMO-CHI-000010
- ModelLogitech Scribe
- Space12.03 Heron
- StatusActive
Healthy when status is active; space matches where the device is installed.
Device management
Healthy- Device namechi-12-03-dev01
- SerialDEMO-CHI-000010
- Firmware5.4.0
Healthy when online in the vendor's device management service; firmware at the fleet standard for the model; settings match the setup guide for the model.
What each field means, and how hostnames and addresses are built: Learn: device fields
Camera·v1.0·19 Oct 2026
Scribe whiteboard camera for Google Meet
- ModelScribe
- FirmwareScribe camera software 1.4+ (Google Meet's Whiteboard Camera option needs at least this)
- ModeGoogle Meet
Checkingon AG-000309
Settings
1 set · 2 verify · 1 per device
New install, in order
- 1Mount the camera on its arm above the whiteboard and run its category cable down to the inline Power Injector.
- 2Power the injector from a mains socket and run its second category cable to the Dongle Transceiver.
- 3Plug the Dongle Transceiver's USB-A cable into the space's ChromeOS compute system.
- 4On first power-up, let auto-calibration find the whiteboard's corners; check them from the Sync App's Video tab and adjust with Edit Boundaries if the frame is off.
Setup guide file state
- AssetboxIn sync
- Fleet LensIn sync
Open the setup guideConfiguring happens in a project's Deploy page.
No firmware line tracked for Logitech Scribe
When the vendor watcher tracks a model, its releases, Aigna's decision on each, and any advisories appear here and on every device of that model.
Symptoms
Likely causes and where to look firstNo camera imageNo power or PoE; Cable or converter fault; Not selected as a sourceCheck Keia Atlas first
Cross-checks
The same fact must agree everywhere it is recorded| Check | Compares |
|---|---|
| Serial match | keia_atlas.serial = inventory.serial |
| Space match | keia_atlas.space = inventory.space |
| Firmware match | device_management.firmware_version = keia_atlas.expected_firmware |
Used in
Device type file
- File
- data/device-classes/camera.yaml
- Version
- 1.0
- Updated
- 2026-09-27
- Hostname prefix