Keia Atlas
Healthy- Space13.07 Goldcrest
- ModelLogitech MeetUp 2
- SerialDEMO-CHI-000102
- LifecycleIn service
- Target firmware5.1.2
Healthy when recorded in the space its space type expects; every port wired as the space type says.
Vendor access
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Device types, units, models, setup guides, standards, IT stores and cables. This demo has the Assets module switched off in Organisation settings.
Device typevideo-barVersion 1.04 models
17 units in service · no advisories to review
469.2 mm × 73.3 mm × 73 mm, front, to scale
Every spec and portShowing Logitech MeetUp 2
5 ports, rear
Drawing traced from Logitech MeetUp 2 product gallery (front). Ports from the vendor's documentation.
Checked on one example, chi-1307-vc01 (simulated values).
Healthy when recorded in the space its space type expects; every port wired as the space type says.
Healthy when status is active; space matches where the device is installed.
Healthy when address reservation matches the MAC address; forward and reverse DNS records resolve.
Healthy when online in the vendor's device management service; firmware at the fleet standard for the model; settings match the setup guide for the model.
Healthy when room resource exists and is linked to the device; capacity matches the space.
Healthy when reporting; no open critical alerts.
What each field means, and how hostnames and addresses are built: Learn: device fields
Video bar·v1.0·19 Oct 2026
Settings
9 set · 2 verify · 4 per device
New install, in order
Setup guide file state
No firmware line tracked for Logitech MeetUp 2
When the vendor watcher tracks a model, its releases, Aigna's decision on each, and any advisories appear here and on every device of that model.
| Check | Compares |
|---|---|
| Serial match | keia_atlas.serial = inventory.serial |
| Space match | keia_atlas.space = inventory.space |
| Hostname match | inventory.hostname = dhcp_dns.hostname |
| Firmware match | device_management.firmware_version = keia_atlas.expected_firmware |
Type the way you would ask a colleague. Keia Atlas picks out what you want, where, which model and which status, and shows each as a chip you can remove or change.