Keia Atlas
Healthy- Space12.08 Barn Owl
- ModelNetgear AV Line M4250-9G1F-PoE+ (GSM4210PD)
- SerialDEMO-CHI-000046
- LifecycleIn service
Healthy when recorded in the space its space type expects; every port wired as the space type says.
Viewing as , ,
Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Assets is switched off
Device types, units, models, setup guides, standards, IT stores and cables. This demo has the Assets module switched off in Organisation settings.
Device typenetwork-switchVersion 1.06 models
In-room network switch
17 units in service · no advisories to review
210 mm × 40 mm × 140 mm, front, to scale
Every spec and portShowing Netgear AV Line M4250-9G1F-PoE+ (GSM4210PD)
Ports
14 ports, front and rear
- Width
- 210 mm
- Height
- 40 mm
- Depth
- 140 mm
- Weight
- 0.965 kg
- Power
- 132.25 W max
Drawing traced from Netgear M4250-9G1F-PoE+ product image (front). Ports from the vendor's documentation.
Checked on one example, chi-1208-sw01 (simulated values).
Asset register
Healthy- Asset tagAG-000046
- SerialDEMO-CHI-000046
- ModelNetgear AV Line M4250-9G1F-PoE+ (GSM4210PD)
- Space12.08 Barn Owl
- StatusActive
- Hostnamechi-1208-sw01
Healthy when status is active; space matches where the device is installed.
Addresses and DNS
Healthy- Hostnamechi-1208-sw01
- MAC02:2E:A7:44:16:72
- IP address10.40.12.218
Healthy when address reservation matches the MAC address; forward and reverse DNS records resolve.
Monitoring
Healthy- Monitor namechi-1208-sw01
Healthy when reporting; no open critical alerts.
What each field means, and how hostnames and addresses are built: Learn: device fields
In-room network switch·v1.0·19 Oct 2026
M4250 AV-over-IP switch (GSM4210PD)
- ModelAV Line M4250-9G1F-PoE+
- Firmware13.0.5.26
- ModeStand-alone
Checkingon dub-303-sw01
Settings
6 set · 2 verify · 4 per device
New install, in order
- 1Mount the switch under the desk or on the wall and connect the out-of-band management port to the management VLAN.
- 2Log in over HTTPS (no password is required on first login) and set the admin password.
- 3Set the SNTP server for the switch's clock.
- 4Apply the Network Profile that matches the space's AV-over-IP protocol, or leave Default if the space has none.
Setup guide file state
- AssetboxIn sync
- InfoDNSIn sync
- Monitor DogIn sync
Open the setup guideConfiguring happens in a project's Deploy page.
No firmware line tracked for Netgear AV Line M4250-9G1F-PoE+ (GSM4210PD)
When the vendor watcher tracks a model, its releases, Aigna's decision on each, and any advisories appear here and on every device of that model.
Symptoms
Likely causes and where to look firstSeveral room devices offlineSwitch without power; Uplink down; PoE budget exceededCheck Monitoring first
Cross-checks
The same fact must agree everywhere it is recorded| Check | Compares |
|---|---|
| Serial match | keia_atlas.serial = inventory.serial |
| Space match | keia_atlas.space = inventory.space |
| Hostname match | inventory.hostname = dhcp_dns.hostname |
Used in
Device type file
- File
- data/device-classes/network-switch.yaml
- Version
- 1.0
- Updated
- 2026-09-27
- Hostname prefix
- sw