Vendor access

This part is for Aigna staff

Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.

Go to your installation

Module

Projects is switched off

Projects, the schedule, planning, the work plan and the Lab. This demo has the Projects module switched off in Organisation settings.

Organisation settings

Task T-1801Survey · Plan phasePRJ-18 Tokyo office hybrid meeting roomsDoneSimulated

Survey both rooms and the ceiling

Done · 4 steps completechecked just now

9 OctWas due 9 Oct
6 hEstimate
4/4Steps done

What to do

Open the space type drawing and walk the space with it.
Check every outlet is where the space type expects it: power and data behind the display, under the table, at the door.
Photograph the display wall, the table floor box and the ceiling.
Note anything that differs from the space type; it goes in the design.

The phase is done when: Brief and budget agreed.

The spaces

15.03 HeronMedium meeting room
15.04 CurlewMedium meeting room

How it closed

Nothing new: the guide was rightClosing needs a fix or a reason. The reasons show how good the guides are.

The devices

16 in these rooms

Heron displayModel set per project · tyo-1503-dsp01 · Display wall

Heron video barPoly Studio X52 · tyo-1503-vc01 · Display wall

Firmware 4.6.2.46004626 Set · 14 Verify

Heron touch controllerPoly TC10 · tyo-1503-tc01 · On the desk

3 Set · 0 Verify

Heron hDBaseT transmitterKramer EXT3-C-XR-T · Below the table

2 Set · 8 Verify

Heron hDBaseT receiver at the displayKramer EXT3-POE-XR-R · Behind the display

2 Set · 8 Verify

Heron microphonePoly Studio Expansion Microphone · On the desk

1 Set · 1 Verify

Heron whiteboard cameraLogitech Scribe · Wall

1 Set · 2 Verify

Heron scaler for the whiteboard camera pictureKramer VP-440H2 · Behind the display

10 Set · 2 Verify

Heron uSB to HDMI converter for the whiteboard cameraINOGENI U-CAM · Behind the display

6 Set · 2 Verify

Heron scheduler panelLogitech Tap Scheduler · tyo-1503-sch01 · At the door

5 Set · 0 Verify

Curlew displayModel set per project · tyo-1504-dsp01 · Display wall

Curlew video barPoly Studio X52 · tyo-1504-vc01 · Display wall

Firmware 4.6.2.46004626 Set · 14 Verify

Curlew touch controllerPoly TC10 · tyo-1504-tc01 · On the desk

3 Set · 0 Verify

Curlew hDBaseT transmitterKramer EXT3-C-XR-T · Below the table

2 Set · 8 Verify

Curlew hDBaseT receiver at the displayKramer EXT3-POE-XR-R · Behind the display

2 Set · 8 Verify

Curlew scheduler panelLogitech Tap Scheduler · tyo-1504-sch01 · At the door

5 Set · 0 Verify