Keia Atlas
Healthy- Space12.01 Reception
- ModelPer project
- SerialDEMO-CHI-000001
- LifecycleIn service
Healthy when recorded in the space its space type expects; every port wired as the space type says.
Viewing as , ,
Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Assets is switched off
Device types, units, models, setup guides, standards, IT stores and cables. This demo has the Assets module switched off in Organisation settings.
Device typedisplayVersion 1.18 models
Display
0 units in service · no advisories to review
Size not published, front, to scale
Every spec and portShowing Solano LCD-46 Display
Ports
6 ports, rear
Drawing traced from Illustrative drawing of a fictional model (house design). Ports from the vendor's documentation.
Checked on one example, chi-1201-dsp01 (simulated values).
Asset register
Healthy- Asset tagAG-000001
- SerialDEMO-CHI-000001
- ModelPer project
- Space12.01 Reception
- StatusActive
- Hostnamechi-1201-dsp01
Healthy when status is active; space matches where the device is installed.
Addresses and DNS
Healthy- Hostnamechi-1201-dsp01
- MAC02:AD:A6:44:16:6A
- IP address10.40.12.89
Healthy when address reservation matches the MAC address; forward and reverse DNS records resolve.
Device management
Healthy- Device namechi-1201-dsp01
- SerialDEMO-CHI-000001
- Firmware5.4.0
Healthy when online in the manufacturer's fleet management (Samsung VXT or LG Business Cloud); firmware at the fleet standard for the model; on and off times match the office's hours.
Monitoring
Healthy- Monitor namechi-1201-dsp01
Healthy when answers SNMP; no open critical alerts.
What each field means, and how hostnames and addresses are built: Learn: device fields
Nothing to configure on Solano LCD-46 Display
It works as it comes, or it is set up through the device it connects to. See every setup guide.
No firmware line tracked for Solano LCD-46 Display
When the vendor watcher tracks a model, its releases, Aigna's decision on each, and any advisories appear here and on every device of that model.
Symptoms
Likely causes and where to look firstNo pictureDisplay off or on the wrong input; HDBaseT link down; Source device asleepCheck Keia Atlas first
Display unreachableNetwork cable unplugged; Port disabled; Address changed; Standby mode that drops the network (network standby off)Check Addresses and DNS first
Display turns itself offNo signal power off or auto power off left on; Off timer set to the wrong time or time zone; Energy saving mode onCheck Device management first
Cross-checks
The same fact must agree everywhere it is recorded| Check | Compares |
|---|---|
| Serial match | keia_atlas.serial = inventory.serial |
| Space match | keia_atlas.space = inventory.space |
| Hostname match | inventory.hostname = dhcp_dns.hostname |
| Name match | device_management.device_name = dhcp_dns.hostname |
Used in
Device type file
- File
- data/device-classes/display.yaml
- Version
- 1.1
- Updated
- 2026-09-29
- Hostname prefix
- dsp