Keia Atlas
Healthy- Space12.03 Heron
- ModelINOGENI U-CAM
- SerialDEMO-CHI-000012
- LifecycleIn service
Healthy when recorded in the space its space type expects; every port wired as the space type says.
Viewing as , ,
Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Assets is switched off
Device types, units, models, setup guides, standards, IT stores and cables. This demo has the Assets module switched off in Organisation settings.
Device typeadapterVersion 1.05 models
Adapter
12 units in service · no advisories to review
70 mm × 23 mm × 83 mm, front, to scale
Every spec and portShowing INOGENI U-CAM
Ports
7 ports, position not stated
- Width
- 70 mm
- Height
- 23 mm
- Depth
- 83 mm
- Weight
- 0.136 kg
- Power
- 14.4 W max
Drawing traced from INOGENI U-CAM product page, input end-plate view. Ports from the vendor's documentation.
Checked on one example, chi-12-03-dev01 (simulated values).
Asset register
Healthy- Asset tagAG-000012
- SerialDEMO-CHI-000012
- ModelINOGENI U-CAM
- Space12.03 Heron
- StatusActive
Healthy when status is active; space matches where the device is installed.
What each field means, and how hostnames and addresses are built: Learn: device fields
Adapter·v1.0·19 Oct 2026
U-CAM USB-to-HDMI bridge
- ModelU-CAM
- Firmware2.18
- ModeStand-alone
Checkingon AG-000311
Settings
6 set · 2 verify · 4 per device
New install, in order
- 1Connect the space's USB camera (and, if separate, its USB audio device) to the two USB 3.0 input ports.
- 2Connect HDMI OUT to the switcher/scaler input.
- 3Connect the LAN port to the AV VLAN.
- 4Power from the included 100-240VAC to 12V/1.2A supply.
Setup guide file state
- AssetboxIn sync
Open the setup guideConfiguring happens in a project's Deploy page.
No firmware line tracked for INOGENI U-CAM
When the vendor watcher tracks a model, its releases, Aigna's decision on each, and any advisories appear here and on every device of that model.
Symptoms
Likely causes and where to look firstDownstream device deadAdapter without power; Cable faultCheck Keia Atlas first
Cross-checks
The same fact must agree everywhere it is recorded| Check | Compares |
|---|---|
| Serial match | keia_atlas.serial = inventory.serial |
| Space match | keia_atlas.space = inventory.space |
Used in
Device type file
- File
- data/device-classes/adapter.yaml
- Version
- 1.0
- Updated
- 2026-09-27
- Hostname prefix