Keia Atlas
Healthy- Space13.05 Wren
- ModelPoly PoE++ 65W 2.5G Adapter
- SerialDEMO-CHI-000093
- LifecycleIn service
Healthy when recorded in the space its space type expects; every port wired as the space type says.
Viewing as , ,
Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Assets is switched off
Device types, units, models, setup guides, standards, IT stores and cables. This demo has the Assets module switched off in Organisation settings.
Device typeadapterVersion 1.05 models
Adapter
19 units in service · no advisories to review
90 mm × 28.5 mm × 51 mm, front, to scale
Every spec and portShowing Poly PoE++ 65W 2.5G Adapter
Ports
3 ports, position not stated
- Width
- 90 mm
- Height
- 28.5 mm
- Depth
- 51 mm
- Weight
- 0.208 kg
Drawing traced from Poly PoE++ 65 W 2.5G adapter product photo (three-quarter view, long side drawn) and its 90 x 28.5 mm size. Ports from the vendor's documentation.
Checked on one example, chi-13-05-dev01 (simulated values).
Asset register
Healthy- Asset tagAG-000093
- SerialDEMO-CHI-000093
- ModelPoly PoE++ 65W 2.5G Adapter
- Space13.05 Wren
- StatusActive
Healthy when status is active; space matches where the device is installed.
What each field means, and how hostnames and addresses are built: Learn: device fields
Adapter·v1.0·19 Oct 2026
Poly PoE++ 65W 2.5G injector
- ModelPoE++ 65W 2.5G Adapter
- FirmwareNot versioned
- ModeStand-alone
Checkingon AG-000372
Settings
0 set · 3 verify
New install, in order
- 1Mount or rack the injector near the space's network switch.
- 2Connect the data-in port to the switch (a standard 2.5Gb/s network port, no PoE required from the switch).
- 3Connect the data+power-out port to the Poly Studio X32 or V12 using the included 3.66m CAT6A cable.
- 4Connect the included power cord to mains.
Setup guide file state
- AssetboxIn sync
Open the setup guideConfiguring happens in a project's Deploy page.
No firmware line tracked for Poly PoE++ 65W 2.5G Adapter
When the vendor watcher tracks a model, its releases, Aigna's decision on each, and any advisories appear here and on every device of that model.
Symptoms
Likely causes and where to look firstDownstream device deadAdapter without power; Cable faultCheck Keia Atlas first
Cross-checks
The same fact must agree everywhere it is recorded| Check | Compares |
|---|---|
| Serial match | keia_atlas.serial = inventory.serial |
| Space match | keia_atlas.space = inventory.space |
Used in
Device type file
- File
- data/device-classes/adapter.yaml
- Version
- 1.0
- Updated
- 2026-09-27
- Hostname prefix