Keia Atlas
Healthy- Space12.03 Heron
- ModelKramer VP-440H2
- SerialDEMO-CHI-000011
- LifecycleIn service
Healthy when recorded in the space its space type expects; every port wired as the space type says.
Viewing as , ,
Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Assets is switched off
Device types, units, models, setup guides, standards, IT stores and cables. This demo has the Assets module switched off in Organisation settings.
Device typeadapterVersion 1.05 models
Adapter
12 units in service · no advisories to review
214.6 mm × 43.6 mm × 163 mm, front, to scale
Every spec and portShowing Kramer VP-440H2
Ports
18 ports, front and rear
- Width
- 214.6 mm
- Height
- 43.6 mm
- Depth
- 163 mm
- Weight
- 1.5 kg
Drawing traced from Kramer VP-440H2 product photo (front panel). Ports from the vendor's documentation.
Checked on one example, chi-12-03-dev01 (simulated values).
Asset register
Healthy- Asset tagAG-000011
- SerialDEMO-CHI-000011
- ModelKramer VP-440H2
- Space12.03 Heron
- StatusActive
Healthy when status is active; space matches where the device is installed.
What each field means, and how hostnames and addresses are built: Learn: device fields
Adapter·v1.0·19 Oct 2026
VP-440H2 presentation switcher/scaler
- ModelVP-440H2
- FirmwareNot versioned
- ModeStand-alone
Checkingon AG-000310
Settings
10 set · 2 verify · 2 per device
New install, in order
- 1Rack-mount VP-440H2 and connect the HDMI/HDBT/VGA/mic inputs and the HDMI and HDBT outputs.
- 2Connect Ethernet and, from the front-panel OSD or web pages, set the network mode below.
- 3Browse to the web pages and turn on password protection; it ships unsecured.
- 4Set HDCP per input/output and manage EDID so every input matches the space's display.
Setup guide file state
- AssetboxIn sync
Open the setup guideConfiguring happens in a project's Deploy page.
No firmware line tracked for Kramer VP-440H2
When the vendor watcher tracks a model, its releases, Aigna's decision on each, and any advisories appear here and on every device of that model.
Symptoms
Likely causes and where to look firstDownstream device deadAdapter without power; Cable faultCheck Keia Atlas first
Cross-checks
The same fact must agree everywhere it is recorded| Check | Compares |
|---|---|
| Serial match | keia_atlas.serial = inventory.serial |
| Space match | keia_atlas.space = inventory.space |
Used in
Device type file
- File
- data/device-classes/adapter.yaml
- Version
- 1.0
- Updated
- 2026-09-27
- Hostname prefix