Keia Atlas
Healthy- Space13.05 Wren
- ModelSound Control Technologies USB-PDI-100
- SerialDEMO-CHI-000094
- LifecycleIn service
Healthy when recorded in the space its space type expects; every port wired as the space type says.
Viewing as , ,
Vendor access
This part is for Aigna staff
Vendors see their own installation and the device reference they need to build it: device types, setup guides and models. Everything else stays with Aigna.
Go to your installationModule
Assets is switched off
Device types, units, models, setup guides, standards, IT stores and cables. This demo has the Assets module switched off in Organisation settings.
Device typeadapterVersion 1.05 models
Adapter
10 units in service · no advisories to review
97 mm × 36 mm × 104 mm, front, to scale
Every spec and portShowing Sound Control Technologies USB-PDI-100
Ports
4 ports, front and rear
- Width
- 97 mm
- Height
- 36 mm
- Depth
- 104 mm
- Weight
- 0.163 kg
Drawing traced from SCT USB-PDI-100 product page (front photo). Ports from the vendor's documentation.
Checked on one example, chi-13-05-dev01 (simulated values).
Asset register
Healthy- Asset tagAG-000094
- SerialDEMO-CHI-000094
- ModelSound Control Technologies USB-PDI-100
- Space13.05 Wren
- StatusActive
Healthy when status is active; space matches where the device is installed.
What each field means, and how hostnames and addresses are built: Learn: device fields
Adapter·v1.0·19 Oct 2026
USB-PDI-100 power delivery injector
- ModelUSB-PDI-100
- FirmwareNot versioned
- ModeStand-alone
Checkingon AG-000373
Settings
0 set · 3 verify
New install, in order
- 1Mount or place the unit at the table, within reach of the locking USB-C cable to the laptop.
- 2Connect the included WPS-USBC-100W power supply to the rear Power In USB-C port.
- 3Connect the rear HDMI Out to the space's switcher/scaler input.
- 4Connect the rear USB-A port to the space's USB system (camera/soundbar or hub), using the application guide's recommended cable.
Setup guide file state
- AssetboxIn sync
Open the setup guideConfiguring happens in a project's Deploy page.
No firmware line tracked for Sound Control Technologies USB-PDI-100
When the vendor watcher tracks a model, its releases, Aigna's decision on each, and any advisories appear here and on every device of that model.
Symptoms
Likely causes and where to look firstDownstream device deadAdapter without power; Cable faultCheck Keia Atlas first
Cross-checks
The same fact must agree everywhere it is recorded| Check | Compares |
|---|---|
| Serial match | keia_atlas.serial = inventory.serial |
| Space match | keia_atlas.space = inventory.space |
Used in
Device type file
- File
- data/device-classes/adapter.yaml
- Version
- 1.0
- Updated
- 2026-09-27
- Hostname prefix